American Saw Mfg Co 24907T9118R 9in 18 Tpi Reciprocating Saw Blade

Product Description

The AMERICAN SAW MFG CO 24907T9118R is a bi-metal reciprocating saw blade designed for heavy metal cutting applications, sold in a 2-pack. Each blade measures 9 inches in length with an 18 TPI tooth configuration, and features a thicker 0.042-inch blade body combined with a wider 1-inch blade width. This added mass reduces blade whipping during cuts, producing straighter, smoother results in demanding metalwork. The shatter-resistant bi-metal construction handles the stress of continuous heavy-use cutting. These blades are appropriate for licensed tradespeople including electricians, plumbers, and HVAC techs who regularly cut conduit, pipe, unistrut, and structural steel during rough-in and service work.

The 24907T9118R is suited for residential and commercial trade applications where heavy metal cutting is routine. The 9-inch blade length accommodates deeper cuts in structural members, metal framing, and thick-wall pipe. The 18 TPI count is effective on dense metal stock where a finer tooth pitch produces cleaner cuts with reduced burr. The 2-pack format supports high-volume service work and job-site situations where blade changes are frequent.

Key Features

• Bi-metal construction resists shattering under heavy cutting loads
• 0.042-inch blade thickness minimizes flex and whipping for straighter cuts
• 1-inch blade width adds lateral stability during aggressive metal cuts
• 18 TPI tooth pitch optimized for heavy metal stock
• Unique blade geometry reinforces traditionally weak areas for extended durability
• Sold as a 2-pack for job-site continuity

Compatibility

Designed as a standard reciprocating saw blade replacement compatible with universal reciprocating saw tool chucks that accept standard shank blades used in heavy metal cutting applications.

Installation Notes

Installation and blade changes should be performed by qualified tradespeople following the tool manufacturer's blade-change procedure. Always power down and disconnect the saw from its power source before removing or installing a blade. Verify the blade is fully seated and locked in the chuck before resuming operation. Eye protection and cut-resistant gloves are standard PPE when handling reciprocating saw blades.