American Metal Products 5VPH Vent Pipe Hanger 5 Inch Steel

Product Description

The AMERICAN METAL PRODUCTS 5VPH is a steel vent pipe hanger designed to support 5-inch diameter vent pipe in residential and light commercial HVAC and combustion-venting applications. With an inside diameter of 5.5 inches, the hanger provides the clearance needed to cradle standard 5-inch B-vent or single-wall vent pipe securely. Fabricated from steel, it offers the rigidity and load-bearing capacity required for long-term support of vertical and near-vertical vent runs. This type of hardware is a standard component in any properly supported venting system.

The 5VPH is suited for use in gas appliance venting systems where pipe hangers are required at regular intervals to prevent sag and maintain proper flue alignment. Typical installation scenarios include support of gas furnace, boiler, or water heater vent pipe runs through mechanical rooms, crawlspaces, and utility areas. It is intended for use with 5-inch nominal vent pipe and is appropriate for both new construction and retrofit service work.

Key Features

• 5.5-inch inside diameter fits standard 5-inch nominal vent pipe
• Steel construction provides rigid, durable pipe support
• Compatible with B-vent and single-wall vent pipe applications
• Supports proper flue alignment and prevents pipe sag on long runs

Compatibility

Designed for use with 5-inch nominal vent pipe. Suitable as an OEM-style replacement or new-installation hanger in residential and light commercial gas appliance venting systems.

Installation Notes

Vent pipe hangers are typically installed by licensed HVAC technicians or plumbers following local mechanical codes and NFPA 54 or the applicable fuel-gas code. Shut down and allow all connected appliances to cool before working on an active vent system. Hangers should be spaced per the vent manufacturer recommendations and code requirements to maintain proper slope and joint integrity. Do not overtighten fasteners in a way that deforms or restricts the pipe.

Technical Specifications

• Inside Diameter: 5.5 inches
• For Use With: 5-inch nominal vent pipe
• Material: Steel

Standard Information

• Brand: AMERICAN METAL PRODUCTS
• Manufacturer Part Number: 5VPH