American Lock A5530KA-25758 Keyed Alike Padlock 1-1/2in

Product Description

The AMERICAN LOCK A5530KA-25758 is a keyed-alike brass and steel padlock designed for industrial, commercial, and trade applications where multiple locks must operate on the same key. The rectangular body measures 1-1/2 inches wide and 3/4 inches thick, with a boron alloy shackle that provides solid cut resistance. The 5-pin cylinder delivers reliable keying security. At 0.63 pounds, the lock is compact and suited for frequent use on gates, hasps, lockout/tagout stations, and equipment enclosures where standardized key control is required.

This padlock fits typical applications in facilities maintenance, electrical lockout/tagout (LOTO) procedures, HVAC equipment rooms, and general contractor job sites. The keyed-alike configuration makes it practical for operations where a single key must open multiple locks across a work area or crew. The boron alloy shackle resists sawing and cutting, making it appropriate for moderate-security outdoor and indoor use. Licensed tradespeople and facilities managers working under standardized key control programs will find this format straightforward to integrate into existing keying systems.

Key Features

• Keyed-alike configuration allows one key to operate multiple A5530KA-25758 locks in the same keying group
• Brass and steel body construction with rectangular profile, 1-1/2 inches wide and 3/4 inches thick
• Boron alloy shackle resists cutting and sawing for moderate-security applications
• 5-pin cylinder for improved pick resistance over standard 4-pin designs
• Shackle clearance of 1 inch with 3/4 inch width and 1/4 inch diameter fits standard hasps and chains
• Compact at 0.63 pounds, suitable for portable use and LOTO station deployment

Compatibility

Designed as an OEM-style keyed-alike padlock in the AMERICAN LOCK A5530 series, compatible with standard hasps, chains, and lockout/tagout devices accepting a 1/4 inch diameter shackle.

Installation Notes

Installation requires no tools — insert the shackle through the hasp or chain and close the lock body until the shackle clicks into the locked position. Before using in a lockout/tagout program, verify the lock meets site LOTO requirements per OSHA 29 CFR 1910.147. Do not force the shackle if resistance is felt, as this may indicate a misaligned hasp or debris in the shackle hole. Confirm the keying group assignment before deploying multiple keyed-alike units across a facility.

WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.