Altronix Corp T2MK7516 Access Power Supply 12 24V 20A

Product Description

The ALTRONIX CORP T2MK7516 is a fused access control power supply designed for use in low-voltage security and access control systems. It operates at both 12 and 24 volts with a 20-amp output capacity, making it suitable for powering door controllers, electric locks, and related access hardware. Built to UL standards and housed in the Trove2 enclosure platform, this unit is intended for installation by licensed low-voltage or alarm system technicians. The integrated fusing provides circuit protection for downstream devices, reducing the risk of damage from overcurrent events.

This power supply is used in commercial and residential access control installations where a centralized, protected power source is required. The dual-voltage output at 12 and 24 volts supports a range of access control hardware. The Trove2 enclosure format is a structured mounting platform commonly specified in security system designs for organized, code-compliant power distribution. Installers working on multi-door access control projects will find this configuration well suited to panel-based deployments.

Key Features

• Dual-voltage output: 12 and 24 volts to support varied access control devices
• 20-amp output capacity for powering multiple downstream loads
• Integrated fusing for overcurrent protection of connected equipment
• UL listed construction for code-compliant installations
• Trove2 enclosure platform for organized, structured panel mounting

Compatibility

Designed as an OEM-style replacement or new-installation power supply for access control systems requiring a dual-voltage, fused power distribution source within the Trove2 enclosure platform.

Installation Notes

This unit should be installed by a licensed low-voltage or alarm system technician in accordance with applicable local codes and NFPA 70 (NEC) requirements. Disconnect all power to the system before wiring or servicing the unit. Verify that total connected load does not exceed the rated 20-amp output before energizing. All fusing should be inspected and confirmed correct for each protected circuit prior to commissioning.