Altronix Corp ALTV1224C4220 Access Power Supply

Product Description

The ALTRONIX CORP ALTV1224C4220 is a dual-output access control power supply designed for low-voltage security and access control installations. It delivers 12 volts DC at 2.5 amps or 24 volts AC at 4 amps from a 220-volt AC input, giving installers flexibility across a range of device requirements. This unit is intended for permanent panel-mount installation and is typically wired by licensed low-voltage or security system technicians. Its dual-voltage output makes it suitable for powering access control hardware, door strikes, magnetic locks, and related field devices from a single supply source.

This power supply is used in commercial and light industrial access control systems where 220-volt input power is available. It fits standard panel or enclosure installations where both 12 VDC and 24 VAC outputs may be needed for connected devices such as controllers, readers, and locking hardware. It is sold as a single unit and is appropriate for new installations or direct replacement of a failed supply in existing access control panels.

Key Features

• Dual-voltage output: 12 volts DC at 2.5 amps or 24 volts AC at 4 amps
• 220-volt AC input for compatibility with international and select commercial power feeds
• Designed for access control and low-voltage security system applications
• Single-unit packaging for direct replacement or new installation use

Compatibility

Designed as an OEM-style replacement or new-installation power supply for access control panels and low-voltage security systems requiring 12 VDC or 24 VAC outputs from a 220-volt input source.

Installation Notes

Installation should be performed by a qualified low-voltage or licensed electrical technician in accordance with applicable local codes and NEC guidelines for access control and security wiring. Disconnect and de-energize all input power before servicing or replacing the unit. Verify that the panel or enclosure is rated for the supply dimensions and that all output circuits are de-loaded before powering up for the first time. Do not exceed the rated output current on either output circuit.