Allied Moulded Products 103WG Building Wire 10/3 250 Feet

Product Description

The ALLIED MOULDED PRODUCTS 103WG is a 10/3 building wire sold in a 250-foot roll, commonly referred to by the trade name Romex-style nonmetallic sheathed cable. This configuration includes three 10-gauge conductors plus a ground, suited for branch circuits requiring a dedicated neutral and ground return path. Electricians use this wire for higher-draw residential circuits such as dryer outlets, large appliance feeds, and 240-volt branch circuits in single-family and multi-family construction. The 10-gauge sizing handles loads up to the ampacity ratings established by NEC for that conductor size.

This wire is a standard choice for residential and light commercial rough-in work. The 250-foot roll length suits typical rough-in runs on new construction and remodel projects without excessive splicing. It is handled and installed exclusively by licensed electricians working under applicable NEC guidelines and local electrical codes. The 10/3 configuration is commonly pulled for circuits serving ranges, dryers, subpanel feeds, and similar high-load applications where a shared neutral is required.

Key Features

• 10/3 conductor configuration with ground for multi-wire and 240-volt branch circuit applications
• 250-foot roll reduces job-site waste and limits splice points on longer runs
• 10-gauge conductors rated for higher-ampacity residential branch circuits per NEC guidelines
• Nonmetallic sheathed cable construction suitable for dry and protected indoor installations

Compatibility

Designed as a standard 10/3 nonmetallic sheathed building wire for use in residential and light commercial electrical branch circuit installations where NEC and local code permit NM-style cable.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code and applicable local amendments. De-energize and lock out the circuit panel before pulling, terminating, or connecting any conductors. NM-style cable must be protected from physical damage and installed only in permitted locations as defined by NEC Article 334. Do not install in wet locations, conduit runs exposed to moisture, or applications where the cable type is not code-approved.

Technical Specifications

• Conductor Configuration: 10/3 with ground
• Roll Length: 250 feet
• Cable Type: Nonmetallic sheathed building wire

Standard Information

• Brand: ALLIED MOULDED PRODUCTS
• Manufacturer Part Number: 103WG