Allegro 1001-200PU Facepiece Alcohol Cleaning Wipes 200ct

Product Description

The ALLEGRO 1001-200PU is a pack of 200 alcohol-based cleaning wipes designed for routine decontamination of rubber respirator facepieces. Each wipe is made from non-woven cloth and pre-saturated with an alcohol cleaning solution. The wipes measure 6 inches by 5 inches, providing adequate surface area to wipe down full-mask and half-mask facepieces thoroughly. These are sold as a single package of 200 wipes, making them practical for service vehicles, shop storage, or job-site first-aid kits. HVAC, industrial, and general trade contractors who maintain a stock of rubber respirators will find these a straightforward consumable for keeping facepieces sanitary between uses.

These wipes are suited for use in any setting where rubber respirator facepieces require regular cleaning — construction sites, mechanical rooms, industrial facilities, and service environments. They are compatible with both full-mask and half-mask rubber respirator facepieces. The non-woven cloth substrate is firm enough to remove contaminants without tearing during use. Because the wipes are not individually wrapped, they are dispensed from the pack as needed rather than carried loose in a pocket, making them best suited for a tool bag, vehicle kit, or workbench storage.

Key Features

• Alcohol solution formulation for effective surface cleaning of rubber facepieces
• Non-woven cloth construction resists tearing during wiping
• 6 inch by 5 inch wipe size covers full-mask and half-mask surfaces in fewer passes
• Compatible with both full-mask and half-mask rubber respirator facepieces
• 200 wipes per package reduces reorder frequency for active crews
• Not individually wrapped — designed for bulk dispensing in a shop or kit environment

Compatibility

Designed for use with rubber respirator facepieces, including full-mask and half-mask configurations.

Installation Notes

These wipes are a maintenance consumable, not an installed component. Respirator cleaning should be performed by trained personnel following the respirator manufacturer's care instructions and applicable OSHA respiratory protection program requirements. Allow facepieces to dry completely before storage or reuse after wiping. Do not use these wipes as a substitute for a full respirator inspection or fit test.