Advance Tabco DI-1-5 Drop-in Sink 20 Gauge Stainless Steel

Product Description

The ADVANCE TABCO DI-1-5 is a single-compartment drop-in sink fabricated from 20-gauge stainless steel. It drops into a countertop cutout and sits flush with the deck surface, making it a standard choice for hand-washing stations, prep areas, and service counters in commercial and light-duty foodservice environments. The bowl measures 10 inches inside length by 14 inches inside width by 5 inches inside depth, with an outside footprint of 12 inches by 18 inches. Licensed plumbers and foodservice equipment installers handle this type of fixture. Its one-piece stainless construction resists corrosion and holds up under daily commercial use.

This sink is suited for countertop installations in commercial kitchens, bars, concession stands, and similar foodservice or janitorial applications. The compact single-bowl configuration fits tight counter runs where space is limited. The 12-inch by 18-inch outside dimension drives the cutout template, so verify deck thickness and available clearance below the counter for drain rough-in before ordering. No specific model compatibility information was provided by the manufacturer for this part.

Key Features

• 20-gauge stainless steel construction for corrosion resistance in wet commercial environments
• Single-compartment bowl design for focused prep or hand-washing use
• 10 x 14 inch interior bowl dimensions provide a practical working basin
• 5-inch inside depth accommodates standard drain fittings and typical wash tasks
• Outside dimensions of 12 x 18 inches determine counter cutout requirements
• Drop-in mounting style for straightforward countertop installation

Compatibility

Designed as an OEM-style drop-in replacement or new-installation sink for standard commercial countertop cutout applications requiring a single-compartment stainless steel bowl with a 12 x 18 inch outside dimension.

Installation Notes

Installation is typically performed by a licensed plumber in accordance with local IPC requirements. Shut off the water supply and disconnect drain lines before removing any existing sink. Verify countertop material thickness and structural support before cutting the deck opening to the outside dimension of the sink. Apply a continuous bead of sealant around the perimeter of the cutout before dropping the sink in place to prevent moisture intrusion beneath the deck.