Aciq EAH-25C(UL) Electric Heater Coil 25 Kw 85300 Btu

Product Description

The ACIQ EAH-25C(UL) is a 25 kW electric heater coil rated at 85,300 BTU/h, designed for installation inside ACIQ unitary air handlers. It adds straight electric resistance heating capacity to ducted systems, converting an air handler into a fully functional electric furnace section. Licensed HVAC technicians install this coil as either a primary heat source or supplemental strip heat within a heat pump system. The UL listing confirms the unit meets recognized safety standards for electric heating equipment. This coil integrates directly into the air handler cabinet without external heat exchangers or combustion components.

This heater coil is intended for use in residential and light-commercial ducted HVAC applications where electric strip heat is specified. It is engineered for ACIQ unitary air handler configurations and pairs with ducted heat pump systems to deliver auxiliary or emergency heat. At 85,300 BTU/h output, it is sized for smaller residential structures in moderate to warm climates where electric heat is a practical primary source. Install is performed inside the air handler cabinet by a licensed HVAC technician familiar with electric heat kit integration.

Key Features

• 25 kW output delivers 85,300 BTU/h of electric resistance heat
• UL listed construction meets recognized electrical safety standards
• Designed as a drop-in electric heater coil for ACIQ unitary air handlers
• Adds straight electric heating to existing ducted heat pump systems
• Eliminates the need for combustion components or flue venting

Compatibility

Compatible with the ACIQ-60-AHD air handler as stated by the manufacturer.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with NEC requirements for electric heating equipment and the air handler manufacturer instructions. Disconnect and lock out all electrical power to the air handler before servicing or inserting the heater coil. Verify that the existing electrical supply circuit is rated for the full load amperage draw of a 25 kW heater before energizing. Do not bypass or omit any thermal limit or safety cutout devices included with or required by the air handler.

Technical Specifications

• Heating Capacity: 25 kW (85,300 BTU/h)
• Certification: UL Listed

Standard Information

• Brand: ACIQ
• Manufacturer Part Number: EAH-25C(UL)