Accupro SAMG606DPPLALTI Drill Mill 3/16 in 2 Flute Altin

Product Description

The ACCUPRO SAMG606DPPLALTI is a solid carbide drill mill designed for combined drilling and milling operations in a single tool. With a 3/16 inch diameter, 90-degree point angle, and AlTiN coating, it handles center drilling, chamfering, spot drilling, and light milling in ferrous and non-ferrous materials. The micrograin carbide substrate provides edge strength and wear resistance at elevated cutting speeds. Two right-hand flutes with right-hand cutting direction keep chip evacuation manageable in short-to-medium depth applications. Licensed machinists and CNC operators use this tool in production and job-shop environments where tool changes need to be minimized.

This drill mill is suited for machining centers and CNC mills running ferrous metals, stainless, aluminum, and hardened materials where AlTiN coating extends tool life by reducing heat transfer into the carbide. The 5/8 inch length of cut and 2 inch overall length make it appropriate for shallow-pocket work, spot facing, and angled-entry drilling. The 3/16 inch shank seats directly in standard ER collets or drill chucks with no adapter required at this diameter.

Key Features

• Solid micrograin carbide construction for rigidity and edge retention at high surface footage
• AlTiN coating reduces thermal load on the cutting edge and extends tool life in ferrous and hardened materials
• 90-degree point angle suitable for spot drilling, chamfering, and combined drill-mill operations
• Right-hand cut and right-hand flute spiral for conventional chip flow on standard CNC spindles
• Mill diameter tolerance of plus 0.000 / minus 0.002 inches for consistent fit in close-tolerance work
• 3/16 inch shank diameter matches tool diameter for direct collet clamping with no step-down adapter

Compatibility

Designed as a standard-shank drill mill compatible with ER collet systems, drill chucks, and tool holders accepting a 3/16 inch round shank on CNC machining centers and manual knee mills.

Installation Notes

Install in a clean, properly sized ER collet or precision drill chuck and confirm runout before production cutting. Ensure the spindle and tool holder are free of chips or contamination that can induce runout at small diameters. Follow the machine tool manufacturer and cutting tool manufacturer feed-and-speed recommendations for the specific workpiece material and depth of cut. Carbide tooling is brittle — avoid interrupted cuts or side loads that exceed the tool design without confirming suitability first.