Accupro Acc -T230600 Single Point Threading Tool

Product Description

The ACCUPRO ACC -T230600 is a solid carbide single point threading tool designed for internal thread cutting operations on CNC lathes and manual turning centers. It handles a minimum thread diameter of 0.23 inches and cuts threads ranging from 14 to 40 TPI, making it suitable for a wide range of internal thread profiles. The tool features a 60-degree profile angle and a cutting depth of 0.6 inches. Solid carbide construction provides the rigidity and wear resistance needed for consistent thread form across production runs. The bright, uncoated finish is suited for a broad range of workpiece materials.

This threading tool is used in machine shops, manufacturing facilities, and job shops where internal threads must be cut to precise standards. It is appropriate for both light production and prototype work. The 5/16-inch shank diameter and 2.5-inch overall length make it compatible with standard boring bar-style toolholders commonly found on CNC turning centers and engine lathes. Machinists and CNC operators install and apply this tool in applications requiring accurate 60-degree thread profiles on internal bores.

Key Features

• Solid carbide construction for rigidity and extended tool life in internal threading applications
• Cuts threads from 14 to 40 TPI with a 60-degree profile angle
• Minimum thread diameter of 0.23 inches suitable for small-bore internal threading
• 0.6-inch cutting depth accommodates a range of thread engagement lengths
• 0.055-inch projection from edge for precise positioning in tight bores
• Bright/uncoated finish compatible with a wide range of workpiece materials

Compatibility

Designed for use with standard toolholders accepting a 5/16-inch shank diameter. Fits boring bar-style toolholding systems on CNC turning centers and manual engine lathes configured for internal threading operations.

Installation Notes

Installation and setup should be performed by a qualified machinist or CNC operator. Power down and lock out the machine before mounting or removing the tool from the toolholder. Ensure the shank is seated fully and clamped securely in the toolholder before beginning any threading pass. Verify thread pitch and profile settings in the machine controller against the workpiece drawing before cutting.