Accupro ACC-RT625 Single Point Tool Bit Carbide Rh Turning

Product Description

The ACCUPRO ACC-RT625 is a right-hand, single point tool bit designed for external turning operations on a lathe. It features a micrograin solid carbide tip brazed to a steel shank body, delivering the wear resistance and edge retention needed for high-speed cuts in ferrous and non-ferrous materials. The shank measures 0.625 inches wide by 0.625 inches tall, and the overall length is 4 inches. This tool bit is ground to an RT style geometry and follows the RT-625 industry standard designation. It is intended for use by machinists and toolroom technicians working in production or job-shop environments.

The ACC-RT625 is suited for external turning applications where a right-hand cutting direction is required. The RT-style form is commonly used for straight turning, facing, and light contouring passes. The 0.625 inch square shank seats directly into standard quick-change or lantern-style tool post holders sized for that shank dimension. This tool bit is appropriate for manual engine lathes and CNC turning centers where a brazed carbide single-point tool is the preferred tooling approach.

Key Features

• Micrograin solid carbide tip for superior edge retention and wear resistance
• RT style geometry suited for external turning and facing operations
• Right-hand cutting direction for conventional lathe setups
• 0.625 inch square shank fits standard tool holders of matching size
• 4 inch overall length provides adequate reach for most turning tool posts
• Conforms to RT-625 industry standard designation

Compatibility

Designed as an OEM-style replacement or standard tooling option for lathes and turning centers that accept 0.625 inch square shank single point tool bits in an RT-style right-hand configuration.

Installation Notes

Installation is performed by a machinist or toolroom technician. Secure the shank firmly in the tool post holder with the cutting tip positioned at or near the centerline of the workpiece before taking any cut. Ensure the lathe spindle is fully stopped and the machine is powered down before changing or adjusting tool bits. Do not exceed the depth-of-cut or feed rate limits of the holder or machine to avoid tip fracture.