Accupro 75209387 Grooving Insert 0.2362 in ACP30M

Product Description

The ACCUPRO 75209387 is a GD-style grooving insert designed for external and internal grooving operations on CNC lathes and turning centers. It carries a cutting width of 0.2362 inches (6.000 mm) and a corner radius of 0.1181 inches (3.00 mm). The insert is manufactured to the ACP30M grade with a PVD coating for wear resistance and runs with a positive rake geometry. The GMR chip breaker promotes reliable chip evacuation during continuous grooving passes. Machinists and toolroom technicians install these inserts into compatible CI-series grooving toolholders for production turning work on ferrous and non-ferrous materials.

The 75209387 suits grooving applications on manual and CNC turning equipment in job shop and production environments. The 0.2362-inch cutting width is appropriate for standard metric groove profiles requiring a 6.000 mm slot. The positive rake angle reduces cutting forces, making it a practical choice for finishing passes and thin-wall workpiece situations. The insert is multi-use capable, supporting grooving, parting, and profiling depending on holder configuration. It is sold individually and must be ordered in multiples of 10 per the manufacturer minimum order requirement.

Key Features

• GD insert style with 0.2362 inch (6.000 mm) cutting width for standard metric groove profiles
• ACP30M manufacturer grade with PVD coating for extended wear life
• GMR chip breaker geometry for consistent chip control during grooving passes
• Positive rake angle reduces cutting forces on light cuts and thin-wall parts
• Multi-use capable: grooving, parting, and profiling applications supported
• Compatible with CI-series toolholders; clamp, screw, and self-grip holding methods accepted

Compatibility

Designed for use with CI-series grooving toolholders that accept GD-style inserts with a size code 24 seat. No additional specific model compatibility data was provided in the product record.

Installation Notes

Installation is performed by qualified machinists following machine tool lockout and spindle-stop procedures before any insert change. Seat the insert fully into the toolholder pocket and secure using the specified clamping method — clamp, screw, or self-grip — as required by the holder design. Inspect the insert seat and clamping hardware for wear or debris before seating a new insert. Verify correct cutting-edge orientation and tool offset entry in the machine control before resuming cuts.