Accupro 584467 Tg Pg 100 Standard Collet 0.75 in

Product Description

The ACCUPRO 584467 is a standard single angle collet designed for use with TG/PG 100 collet chucks in precision machining applications. It accepts a 0.75 inch (3/4 inch) tool shank and delivers a total indicator runout (TIR) of 0.00078 inches (0.0200 mm), making it suitable for applications where concentricity and repeatability are critical. The collet measures 2.386 inches overall length with a maximum body diameter of 1.278 inches. This collet is installed by machinists and toolroom technicians working with TG/PG 100 toolholding systems on milling machines, machining centers, and similar CNC or manual equipment.

The 584467 is intended for use in standard TG/PG 100 collet chuck assemblies across a range of machining environments, including job shops, production floors, and toolrooms. It is suited for holding round-shank cutting tools such as end mills, drills, and reamers at the 3/4 inch nominal size. Its single angle design conforms to the TG/PG 100 series specification and is appropriate for both light and moderate cutting operations where consistent clamping force and low runout are required.

Key Features

• TG/PG 100 series collet for broad compatibility with matching chuck bodies
• 0.75 inch collet bore accommodates standard 3/4 inch round shank tooling
• TIR of 0.00078 inches (0.0200 mm) supports precision concentricity requirements
• Overall length of 2.386 inches with maximum body diameter of 1.278 inches
• Standard single angle design for consistent clamping and tool retention

Compatibility

Designed for use with TG/PG 100 series collet chuck systems accepting 3/4 inch round shank tooling. Confirm chuck series and bore size before installation.

Installation Notes

Installation should be performed by a qualified machinist or toolroom technician. Ensure the machine spindle is fully stopped and the chuck is removed or locked out before inserting or removing the collet. Clean all mating surfaces and inspect the collet bore and chuck taper for chips, burrs, or wear before assembly. Do not exceed the tool shank size rating of this collet, as oversizing will damage the collet and compromise clamping integrity.