Accupro 54029277 Solid Carbide Square Milling Insert

Product Description

The ACCUPRO 54029277 is a solid carbide milling insert designed for precision material removal in CNC milling applications. Manufactured to ISO code XDLT10T308ERSCM, this insert features a square shape with a positive rake geometry and a 15-degree relief angle that promotes clean cutting action and reduced cutting forces. The CVD coating provides wear resistance and thermal stability during high-speed machining. With four usable cutting edges per insert, it delivers extended service life per unit. It is installed by machinists and CNC tooling technicians in compatible XDLT-series milling cutter bodies.

This insert is suited for use in the XDLT cutter series and is intended for right-hand cutting operations. The ACS35 manufacturer grade and CVD finish make it appropriate for milling ferrous and non-ferrous materials where controlled chip formation and dimensional consistency are required. Maximum depth of cut is 0.0394 inches (1.00 mm), making it well matched to light-to-moderate finishing and semi-finishing passes in production and job-shop environments. Insert holding is via screw clamp, consistent with standard XDLT toolholder configurations.

Key Features

• Solid carbide construction with CVD coating for wear and heat resistance
• Square insert shape with positive rake and 15-degree relief angle for reduced cutting forces
• Four cutting edges per single-sided insert for extended tooling value
• Corner radius of 0.0315 inches (0.80 mm) for controlled surface finish
• Right-hand cutting orientation, screw-held mounting
• Maximum depth of cut of 0.0394 inches (1.00 mm) suitable for finishing and semi-finishing passes

Compatibility

Designed for use with XDLT-series and CI-series milling cutter bodies that accept XDLT10T308ERSCM style inserts with screw-clamp insert holding.

Installation Notes

Installation is performed by qualified CNC machinists or tooling technicians. Always power down and lock out the machine spindle before changing inserts. Use the correct torx or hex key to seat the clamping screw to the toolholder manufacturer specification. Inspect the insert pocket and seating surface for chips or debris before installing a new insert to ensure proper seating and runout control.