Accupro 41672239 Double Angle Milling Cutter 90 Deg

Product Description

The ACCUPRO 41672239 is a solid carbide double angle milling cutter designed for precise angular milling operations in metalworking applications. It features a 90-degree included angle, a 5/32-inch cutting diameter, and a 5/64-inch cutting width, making it well suited for cutting V-grooves, chamfers, and dovetail features on ferrous and non-ferrous workpieces. The cutter runs on a 3/16-inch shank for secure toolholder engagement and measures 2 inches in overall length. With 4 teeth and an uncoated solid carbide construction, it delivers sharp, consistent cutting edges for applications where dimensional accuracy and finish quality are critical. Machinists and toolroom operators are the primary users of this type of cutter.

This double angle milling cutter is intended for use on CNC machining centers, manual knee mills, and tool-and-die setups where angular features must be cut to tight tolerances. It is appropriate for light to moderate material removal on steel, aluminum, brass, and similar machinable materials. The 90-degree included angle and narrow 5/64-inch cutting width make it a practical choice for fine detail work, including V-groove engraving, angular seat cutting, and precision chamfering in close-tolerance fixtures and tooling components.

Key Features

• 90-degree included angle for V-groove and chamfer milling
• Solid carbide construction for rigidity and edge retention
• 5/32-inch cutting diameter with 5/64-inch cutting width for fine detail work
• 4 teeth provide balanced cutting action and consistent chip load
• 3/16-inch shank diameter compatible with standard collets and toolholders
• Uncoated finish suitable for a broad range of machinable materials

Compatibility

Designed as an OEM-style replacement or direct-use double angle milling cutter for standard 3/16-inch collet and toolholder systems used in CNC and manual milling machine setups.

Installation Notes

Installation and use of this cutter should be performed by a qualified machinist familiar with rotary cutting tool procedures. Ensure the machine spindle is fully stopped and locked out before installing or removing the cutter from the toolholder. Seat the shank fully in a correctly sized collet or endmill holder and tighten to the toolholder manufacturer torque specification. Inspect the cutting edges for chips or damage before each use and replace the cutter if edge integrity is compromised.