Accupro 38361788 Double Angle Milling Cutter 60 Deg 3/8 in

Product Description

The ACCUPRO 38361788 is a double angle milling cutter designed for precise angular slotting, chamfering, and dovetail form work on milling machines. Built from solid carbide, it delivers the rigidity and wear resistance required for consistent performance on ferrous and non-ferrous materials. The cutter features a 60-degree included angle, a 3/8-inch cut diameter, and a 0.072-inch cut width, making it well suited for narrow, accurate angle cuts. With 6 teeth and an uncoated finish, this tool is optimized for applications where sharp edge geometry and dimensional precision are the priority.

This cutter is used in production and toolroom milling operations where angular profile cuts, v-slots, or chamfer details must be held to tight tolerances. The 3/8-inch shank diameter provides direct mounting in standard collet chucks and end mill holders. The 1/4-inch neck diameter and 0.572-inch neck length allow clearance in deeper pockets and stepped workpieces. It is commonly installed by machinists and toolroom operators on vertical and horizontal milling machines, CNC machining centers, and manual knee mills requiring angular form cutters.

Key Features

• 60-degree included angle for precise angular slot and chamfer milling
• Solid carbide construction provides high rigidity and wear resistance
• 0.072-inch cut width enables narrow, accurate angular cuts
• 6-tooth configuration balances chip evacuation with cut finish quality
• Uncoated finish maintains sharp edge geometry for ferrous and non-ferrous materials
• 1/4-inch neck diameter with 0.572-inch neck length allows clearance in confined features

Compatibility

Designed as a direct-mount double angle milling cutter compatible with standard 3/8-inch collet chucks and end mill holders used on vertical milling machines and CNC machining centers.

Installation Notes

Installation should be performed by a qualified machinist following the machine tool manufacturer guidelines for tool holding and runout verification. Ensure the spindle is fully powered down and locked out before mounting or removing the cutter. Seat the shank fully in the collet or holder and torque the drawbar or set screw to the tool holder specification. Inspect the cutting edges for chipping before each use, as solid carbide tooling is brittle and sensitive to improper handling or interrupted cuts.