Accupro 31636533 Double Angle Milling Cutter 60 Deg Carbide

Product Description

The ACCUPRO 31636533 is a double angle milling cutter designed for precision grooving, chamfering, and dovetail milling operations on CNC and manual milling machines. Built from solid carbide, this cutter delivers the rigidity and wear resistance required for cutting ferrous and non-ferrous materials. It features a 60-degree included angle, a 1/4-inch cut diameter, and a 0.072-inch cutting width. The 1/4-inch shank and 1/8-inch neck diameter allow it to reach into confined areas without interference. With 4 cutting teeth and an uncoated finish, it is suited for shops that prefer uncoated tooling for specific material applications or re-sharpening workflows.

This cutter is used in precision machining environments including tool and die, mold making, aerospace component work, and general metalworking. Its compact geometry makes it a practical choice for cutting v-grooves, undercuts, and angular features on small workpieces. The 2-inch overall length and 0.259-inch neck length provide adequate reach for most standard milling setups. Machinists and tool room operators working with tight tolerances will find the solid carbide construction beneficial for maintaining edge integrity over repeated cuts.

Key Features

• 60-degree included angle for precise v-groove and chamfer geometry
• Solid carbide construction provides hardness and wear resistance
• 1/4-inch cut diameter with 0.072-inch cutting width for fine, controlled material removal
• 4-tooth configuration balances chip evacuation with cutting efficiency
• 1/8-inch neck diameter enables access to recessed or confined workpiece features
• Uncoated finish suitable for re-sharpening or use on specific non-ferrous materials

Compatibility

Designed as a direct-fit replacement or standard tooling choice for 1/4-inch shank collets and tool holders on CNC machining centers and manual milling machines that accept straight-shank end mills.

Installation Notes

Installation is performed by qualified machinists or tool room personnel. Secure the 1/4-inch shank in a compatible collet or end mill holder and torque to the machine manufacturer's specification before use. Verify runout with a dial indicator before beginning cuts to maintain dimensional accuracy. Do not exceed the cutter's rated depth of cut or feed rate for the material being machined.