Accupro 2500112 Roughing End Mill 3/4 in Solid Carbide

Product Description

The ACCUPRO 2500112 is a single-end roughing end mill engineered for aggressive material removal in milling operations. Built from micrograin solid carbide and coated with TiCN (Titanium Carbonitride), it delivers high hardness and wear resistance across a range of workpiece materials. The 3/4 inch cutting diameter pairs with a 2.25 inch length of cut and a 5 inch overall length, making it well suited for long-reach roughing passes. The fine-pitch, 4-flute geometry produces a right-hand cutting and right-hand flute direction. Centercutting capability allows plunge entry. Shank diameter matches the cutting diameter at 3/4 inch. This tool is installed by machinists and CNC operators in production and job-shop environments.

This end mill is intended for roughing cuts in ferrous and non-ferrous metals where high stock removal rates are the priority. The long flute length and micrograin carbide substrate make it suitable for deeper axial cuts in vertical machining centers, horizontal mills, and manual knee mills. It is a single-end tool, meaning it is replaced rather than reversed when worn. The TiCN coating extends tool life compared to uncoated carbide when cutting steel, cast iron, and similar materials. It is sold individually.

Key Features

• Micrograin solid carbide substrate for improved edge strength and wear resistance
• TiCN coating for extended tool life on ferrous and hard materials
• 4-flute fine-pitch roughing geometry for efficient chip evacuation and aggressive cuts
• Centercutting design allows direct plunge entry without a pilot hole
• Long flute length of 2.25 inches supports deeper axial depth of cut
• Right-hand cut and right-hand helix for standard spindle direction compatibility

Compatibility

Designed as an OEM-style replacement or direct-application roughing end mill for 3/4 inch collet, end mill holder, or hydraulic chuck tooling systems used in standard CNC and manual milling machines.

Installation Notes

Installation should be performed by a qualified machinist or CNC setup technician. The spindle must be fully stopped and the machine locked out before inserting or removing the tool from the holder. Ensure the shank is clean and the holder bore is free of chips before clamping. Verify runout at the cutting edge after installation using a dial indicator before beginning cuts.