Accupro 14788344 Square End Mill 3/32 in 2 Flute Carbide

Product Description

The ACCUPRO 14788344 is a solid carbide square end mill designed for precise milling operations in metalworking and machining applications. With a 3/32 inch (0.0940 inch) mill diameter and a 2-flute helical configuration, this center-cutting end mill handles slotting, profiling, and plunge cuts in a compact package. The cylindrical shank measures 1/8 inch (0.1250 inch) in diameter, and the overall tool length is 1-1/2 inches. Solid carbide construction provides the hardness and wear resistance needed for demanding cuts in steel, aluminum, and similar materials. It is installed and operated by machinists and CNC programmers in job shop and production environments.

This end mill is suited for light-duty to medium-duty milling work where a small-diameter tool is required. The 3/16 inch (0.1880 inch) length of cut makes it appropriate for shallow slots, contour work, and fine detail passes on milled components. The center-cutting geometry allows direct plunge entry into workpiece material without a pre-drilled pilot hole. The 29 to 31 degree helix angle promotes chip evacuation during cutting passes. Typical applications include CNC machining centers and manual knee mills running non-ferrous and ferrous workpiece materials.

Key Features

• Solid carbide construction for hardness and extended tool life
• Center-cutting design allows direct plunge milling without a pilot hole
• 2-flute helical configuration supports chip clearance in slotting operations
• 29 to 31 degree helix angle for balanced cutting action and chip evacuation
• Cylindrical shank for standard collet or end mill holder compatibility
• Compact 1-1/2 inch overall length suits confined milling setups

Compatibility

Designed as a standard cylindrical-shank square end mill compatible with 1/8 inch collets and end mill holders used on CNC machining centers and manual milling machines.

Installation Notes

Installation is performed by qualified machinists or CNC setup personnel. Power down and lock out the spindle before changing tooling. Seat the shank fully in the collet or end mill holder and torque the retention mechanism per the holder manufacturer specification. Verify runout with a dial indicator before beginning a production cut.