Accupro 12462425 Square End Mill 0.052in 2 Flute Carbide

Product Description

The ACCUPRO 12462425 is a solid carbide square end mill designed for precision milling operations in metalworking and machining applications. With a 0.052-inch cutting diameter and a 5/32-inch (0.156-inch) length of cut, this tool is built for small-diameter, tight-tolerance work. The 1/8-inch shank diameter and 1-1/2-inch overall length make it suitable for CNC machining centers and manual mills where compact tooling is required. The micrograin carbide construction provides hardness and wear resistance in demanding cutting conditions. A 30-degree helix angle promotes efficient chip evacuation, and the bright/uncoated finish is well-suited for general-purpose milling where coating is not required.

This end mill is intended for use in machine shops, tool and die operations, and precision component manufacturing. The single-end, two-flute configuration supports slotting, profiling, and light pocket milling on ferrous and non-ferrous materials. Its small diameter makes it a practical choice for detail work, intricate part features, and prototype machining where standard-size tooling cannot reach. Right-hand cutting and right-hand flute direction are standard for conventional spindle setups.

Key Features

• 0.052-inch cutting diameter for small-feature and detail milling
• Solid micrograin carbide construction for hardness and edge retention
• 30-degree helix angle promotes chip flow and reduces heat buildup
• Center-cutting design allows plunge entry into the workpiece
• Bright/uncoated finish suitable for general-purpose and non-ferrous milling
• Right-hand cut and right-hand spiral for standard CNC and manual mill setups

Compatibility

Designed as a general-purpose replacement or production solid carbide square end mill for CNC machining centers and manual mills accepting a 1/8-inch round shank toolholder.

Installation Notes

Installation and tool changes must be performed with the spindle fully stopped and the machine in a safe, locked-out state. The shank should be cleaned and seated fully in the collet or toolholder before tightening to the toolholder manufacturer's specifications. Verify runout with a dial indicator after installation to confirm concentricity before cutting. This tool is intended for use by qualified machinists familiar with speeds, feeds, and depth-of-cut parameters appropriate for the workpiece material.