Accupro 12184086 Ball End Mill 0.125 in 2 Flute Carbide Ticn

Product Description

The ACCUPRO 12184086 is a single-end ball end mill designed for precision milling of contoured surfaces, slots, and 3D profiles in a wide range of materials. Built from micrograin solid carbide, it delivers the rigidity and edge retention needed for demanding cutting applications. The 0.125-inch diameter tool carries a 40-degree helix angle that promotes efficient chip evacuation and reduces cutting forces. A TiCN coating adds surface hardness and lubricity, extending tool life in ferrous and non-ferrous materials alike. This tool is installed and run by machinists and CNC toolroom technicians working on vertical or horizontal machining centers and manual mills.

This end mill suits applications in job shops, production facilities, and toolroom environments where tight-tolerance profiling, pocketing, and contouring are required. The stub length configuration and 0.25-inch length of cut make it appropriate for short-reach operations where rigidity and chatter resistance are priorities. Right-hand cutting and right-hand spiral flute geometry are standard for conventional CNC spindle setups. The single-end design means the tool is replaced rather than flipped when the cutting end is worn.

Key Features

• Micrograin solid carbide construction for superior edge retention and wear resistance
• TiCN coating increases surface hardness and reduces built-up edge in ferrous and non-ferrous cuts
• 40-degree helix angle promotes chip evacuation and reduces cutting forces
• Ball end geometry enables profiling, contouring, and 3D surface milling
• Right-hand cut and right-hand spiral for standard CNC spindle compatibility
• Stub length design maximizes rigidity in short-reach applications

Compatibility

Designed as an OEM-style replacement or standard tooling selection for CNC machining centers and manual mills accepting a 0.125-inch round shank end mill.

Installation Notes

This tool is installed by machinists and CNC toolroom technicians into a compatible end mill holder, collet chuck, or shrink-fit holder sized for a 0.125-inch shank. Ensure the spindle is fully stopped and the machine is in a safe, locked-out state before changing tooling. Verify tool runout after installation to protect the carbide cutting edge. Handle solid carbide tooling carefully to avoid chipping the flutes during storage and setup.