Accuformnmc T235 Vinyl Marking Tape 3 in 108 Ft Light Duty

Product Description

The ACCUFORMNMC T235 is a light-duty vinyl marking tape designed for floor and surface marking applications in commercial and industrial environments. At 3 inches wide and 108 feet long, the roll covers substantial run lengths in a single install. The tape features a self-adhesive backing applied to a smooth vinyl face, with a thickness of 0.002 inches (2 mil). It is waterproof and wear-resistant, making it suitable for areas that see routine foot traffic. Facility maintenance technicians and safety coordinators are the typical installers.

The T235 is used for lane marking, workstation boundaries, aisle delineation, and general floor organization in warehouses, factories, and commercial facilities. Its smooth, non-anti-slip surface is intended for low-traffic pedestrian zones where visual marking is the primary goal rather than traction. The solid pattern provides consistent color coverage across the full roll length, supporting clear visual communication on smooth floor surfaces.

Key Features

• Self-adhesive backing for direct application to smooth surfaces
• Waterproof construction resists moisture and routine cleaning
• Wear-resistant vinyl face holds up under light foot traffic
• 3-inch width provides high visibility for aisle and boundary marking
• 108-foot roll length minimizes seams over long marking runs
• Solid pattern delivers uniform color across full length

Compatibility

Designed as a light-duty floor and surface marking tape suitable for smooth, clean, dry flooring substrates in indoor commercial and industrial settings.

Installation Notes

Surface preparation is critical - the substrate should be clean, dry, and free of dust, oil, or loose material before application. Apply firm, even pressure along the full length of the tape to ensure full adhesive contact. This tape is rated for light-duty traffic only and is not intended for vehicle or heavy equipment pathways. Remove and replace rather than overlap when remarking is needed to maintain adhesion integrity.