Abbott Rubber T22005001 Bulk Fuel Line Hose 3/16 in 150 Ft

Product Description

The ABBOTT RUBBER T22005001 is a PVC general purpose fuel line hose designed for low-pressure fuel delivery in non-engine-bay applications. It carries petroleum-based fuels and resists oil and grease along its exterior. The hose is rated for 175 to 250 psi working pressure and handles temperatures up to 150 degrees F. It ships as a 150-foot bulk spool, allowing technicians and contractors to cut lengths on the job rather than stocking multiple precut assemblies. This format is well suited for shops, fleet maintenance facilities, and fuel transfer setups where custom runs are the norm.

This hose is intended for general purpose fuel-line service outside of under-hood environments. Typical applications include fuel transfer lines, small engine supply runs, outdoor power equipment, and gravity-feed or low-pressure pump systems. The bulk spool format makes it practical for plumbing shops, equipment dealers, and service technicians who need flexibility in cut length. Because this hose is not rated for under-hood use, it should not be installed in locations exposed to engine heat, hot exhaust components, or high-temperature underhood conditions.

Key Features

• PVC construction with oil and grease resistance for petroleum-based fuel service
• Working pressure rated at 175 to 250 psi for low-pressure fuel systems
• Maximum service temperature of 150 degrees F
• 3/16-inch inside diameter suits small-bore fuel supply lines
• 150-foot bulk spool allows field cutting to required lengths
• Not rated for under-hood or high-heat applications

Compatibility

Designed for general purpose, non-under-hood fuel line service with petroleum-based products in low-pressure systems.

Installation Notes

Installation should be performed by a qualified technician familiar with fuel system safety practices. Shut off all fuel supply valves and relieve system pressure before cutting or connecting the hose. Secure all fittings with appropriate clamps rated for the operating pressure, and verify there are no kinks or contact points with sharp edges after routing. Do not install this hose in under-hood locations or near heat sources that exceed its 150-degree-F temperature rating.

Technical Specifications

• Inside Diameter: 3/16 inches
• Length: 150 feet
• Pressure Rating: 175 to 250 psi
• Maximum Temperature: 150 degrees F
• Material: PVC
• Package Type: Bulk spool
• Weight: 9.5 pounds
• UPC: 00708289470087

Standard Information

• Brand: ABBOTT RUBBER
• Manufacturer Part Number: T22005001