Abb tlm2412ccug 125A 24-circuit Load Center Nema 1

Product Description

The ABB tlm2412ccug is a 125-amp combination load center designed for single-phase residential and light commercial electrical distribution. It accepts both top and bottom feed configurations, giving installers flexibility in panel placement and conduit routing. Rated at 120/240 volts AC and equipped with a 22 kA interrupt rating, this load center handles the fault current demands of standard residential service entrance applications. The enclosure meets NEMA 1 standards for indoor dry-location use and is sized at 24-11/16 inches high by 14 inches wide by 3-3/4 inches deep. A factory-installed ground bar is included. Licensed electricians are the typical installing trade for this equipment.

This load center is suited for new construction and panel replacement projects in single-family homes, apartments, and light commercial spaces where a 24-circuit indoor flush-mount distribution panel is required. The flush mounting style integrates cleanly into finished walls, making it a common choice for residential applications where a surface-mount enclosure is not preferred. The combination feed design supports top or bottom conduit entry without requiring a separate feed kit.

Key Features

• 125-amp main rating with 22 kA interrupt capacity for standard residential service
• 24-circuit capacity supporting a full complement of single-pole and double-pole breakers
• Combination top and bottom feed design eliminates the need for a separate feed adapter
• NEMA 1 enclosure rated for indoor dry locations
• Flush mount configuration for clean integration into finished wall installations
• Accepts 6 AWG to 2/0 AWG copper or aluminum conductors at the main lugs

Compatibility

Designed as an OEM-style replacement or new-installation load center for single-phase 120/240-volt residential and light commercial electrical distribution systems requiring a 24-circuit NEMA 1 flush-mount enclosure.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. De-energize the service entrance and verify absence of voltage before working inside the enclosure. Ensure the rough-in opening dimensions match the enclosure footprint before mounting to avoid rework. Do not exceed the conductor range of 6 AWG to 2/0 AWG when terminating service entrance wiring at the main lugs.

Technical Specifications

• Amperage Rating: 125 A
• Voltage Rating: 120/240 volts AC
• Interrupt Rating: 22 kA
• Number of Circuits: 24
• Enclosure Type: NEMA 1
• Mounting Type: Flush
• Feed Type: 1-Phase Combination Top/Bottom Feed
• Enclosure Dimensions: 24-11/16 inches H x 14 inches W x 3-3/4 inches D
• Wire Range: 6 to 2/0 AWG Cu/Al

Standard Information

• Brand: ABB
• Manufacturer Part Number: tlm2412ccug