Abb tgn3322 Non-fused Safety Switch 60A 3P 240V Nema 1

Product Description

The ABB tgn3322 is a general duty, non-fused safety switch rated for 60 amps, 3 poles, and 240 volts, housed in a NEMA 1 enclosure for indoor use. It serves as a disconnect means for electrical equipment in residential and light commercial applications, allowing a licensed electrician to safely isolate power to motors, HVAC equipment, or other loads. The three-pole configuration handles 240-volt circuits where a full disconnect of all ungrounded conductors is required. The NEMA 1 enclosure is suited for dry indoor environments where protection against incidental contact with the enclosed equipment is the primary concern.

This switch is intended for general duty service in residential and light commercial installations. Typical applications include disconnecting rooftop or split-system HVAC units, pumps, compressors, and similar motor loads where a lockable, visible-blade disconnect is required by the National Electrical Code. The non-fused design means overcurrent protection is provided upstream, making this switch appropriate for installations where a separate fused panel or breaker already handles fault protection.

Key Features

• 60-amp, 3-pole configuration for 240-volt non-fused disconnect service
• NEMA 1 indoor enclosure provides protection against incidental contact in dry locations
• General duty rating suitable for residential and light commercial applications
• Non-fused design works with existing upstream overcurrent protection
• Lockable handle supports NEC lockout/tagout requirements at the disconnect point

Compatibility

Designed as an OEM-style general duty safety switch for residential and light commercial electrical disconnect applications requiring a 60-amp, 3-pole, 240-volt non-fused switch in a NEMA 1 enclosure.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize the upstream circuit at the panel before mounting or wiring the switch. Verify the enclosure is mounted in a dry, indoor location consistent with the NEMA 1 rating. Do not use this switch as the sole overcurrent protection device; upstream fusing or a breaker is required.

Technical Specifications

• Amperage Rating: 60 amps
• Number of Poles: 3
• Voltage Rating: 240 volts
• Switch Type: Non-Fused
• Duty Rating: General Duty
• Enclosure Type: NEMA 1 (Indoor)
• Application: General

Standard Information

• Brand: ABB
• Manufacturer Part Number: tgn3322