Abb b9123/8 Channel Spring Nut 3/8-16 Steel

Product Description

The ABB b9123/8 is a steel channel spring nut designed for securing threaded rod, bolts, and hardware within strut channel systems. The integrated spring holds the nut in position inside the channel track, allowing single-handed placement and alignment before final torque. Sized for 3/8-16 inch thread and built from steel with a Galv-Krom standard finish, this nut resists corrosion in typical indoor and light industrial environments. Electricians, mechanical contractors, and plumbers use this type of hardware when assembling pipe hangers, conduit supports, and equipment mounts on channel framing systems.

This spring nut is specified for use with 3/4 inch deep strut channels. It is a standard component in suspended ceiling grids, wall-mounted equipment supports, and overhead pipe and conduit runs where channel framing is the primary structural medium. The self-holding clamping design speeds up assembly on overhead or vertical channel installations where loose hardware is difficult to manage. This part is sold under the Kindorf brand within the ABB product family.

Key Features

• Self-holding spring keeps the nut positioned in the channel without additional support during assembly
• 3/8-16 inch thread size fits standard threaded rod and hardware used in channel framing systems
• Rated for use with 3/4 inch deep channels
• Steel construction with Galv-Krom standard finish for corrosion resistance
• RoHS3, REACH 247, and TSCA Section 6(h) compliant

Compatibility

Designed for use with 3/4 inch deep strut channels accepting 3/8-16 inch threaded fasteners. Verify channel depth and thread specification before installation.

Installation Notes

Installation is typically performed by licensed electricians, mechanical contractors, or plumbers working with channel framing systems. De-energize any nearby electrical systems and relieve pressure from any adjacent piping before working overhead or in confined spaces. Slide the spring nut into the channel slot, position it under the desired hole or fitting, then thread the bolt or rod in by hand before applying final torque with appropriate hand tools. Follow applicable NEC, IPC, or IFGC guidelines for support spacing and fastener requirements based on the system being supported.

Technical Specifications

• Thread Size: 3/8-16 inches
• Compatible Channel Depth: 3/4 inches
• Material: Steel
• Finish: Galv-Krom / Standard
• RoHS Compliance: RoHS3 Compliant
• REACH Compliance: REACH 247 Compliant
• TSCA Compliance: TSCA Section 6(h) Compliant

Standard Information

• Brand: ABB
• Manufacturer Part Number: b9123/8