3M Scotch-weld 7100148768 Epoxy Adhesive 50 Ml Cartridge

Product Description

The 3M SCOTCH-WELD 7100148768 is a two-part epoxy adhesive packaged in a 50 mL dual-cartridge format. Part of the DP460 series, it delivers a working time of 60 to 90 minutes, giving installers and assemblers adequate open time for fixture alignment and joint assembly before cure begins. Full cure is reached at 168 hours. The off-white color allows for visual inspection of bond coverage on light-colored substrates. This adhesive is suited for structural bonding applications where a controlled work window and strong final bond strength are required. Installers, fabricators, and maintenance technicians working with metal, composite, or rigid plastic assemblies will find the cartridge format practical for controlled dispensing with minimal waste.

This epoxy adhesive is used in industrial maintenance, equipment repair, and structural assembly applications across commercial and trade environments. The 50 mL cartridge size is well suited for field repairs and bench assembly where moderate volumes are needed. The long working time makes it appropriate for complex assemblies, multi-component fixtures, or situations where precise positioning is required before the adhesive sets. It is not intended for high-cycle thermal or impact applications without verification against the manufacturer's technical data sheet.

Key Features

• 60 to 90 minute working time allows extended positioning and alignment before cure
• Full cure achieved at 168 hours for maximum bond strength development
• 50 mL dual-cartridge container supports controlled, low-waste dispensing
• Off-white color provides visual confirmation of adhesive coverage
• DP460 series formulation designed for structural bonding applications
• Compact cartridge format suitable for field service and bench assembly use

Compatibility

Designed as an OEM-style structural epoxy adhesive for use in industrial maintenance, fabrication, and assembly applications where a two-part cartridge-dispensed epoxy is specified.

Installation Notes

Surface preparation is critical for epoxy bond performance — clean, degrease, and abrade bonding surfaces prior to application. Use a compatible static mix nozzle to ensure proper mixing of the two components before dispensing onto the work surface. Dispense and discard a small amount at the start of each use session to confirm proper mix ratio output. Allow full cure time before applying structural loads to the bonded assembly.