3M Scotch-weld 7100148760 Epoxy Adhesive Cartridge 48.5 Ml

Product Description

The 3M SCOTCH-WELD 7100148760 is a two-part epoxy adhesive supplied in a 48.5 mL dual-cartridge format. It is part of the DP100 series and delivers a 5-minute working time, giving technicians and tradespeople a practical open time for fitting and adjusting bonded assemblies before the adhesive sets. Full cure is reached in 24 to 48 hours. The cream-colored formulation bonds a wide range of substrates and is suited for structural and semi-structural repair and assembly tasks across HVAC, plumbing, electrical, and general trade applications. Installers in both residential and commercial settings rely on this product for reliable, high-strength bonding where mechanical fasteners alone are not practical.

This adhesive is used in applications requiring a fast-setting, permanent bond in field or shop environments. Its cartridge format is compatible with standard dual-cartridge dispensing guns, allowing consistent mix ratios and minimizing waste. It is appropriate for metal, rigid plastics, and composite substrates commonly encountered in mechanical and electrical trade work. The DP100 series designation identifies this as a general-purpose structural epoxy within the 3M SCOTCH-WELD product line.

Key Features

• 5-minute working time allows adjustment of parts before the bond sets
• Full cure achieved in 24 to 48 hours for maximum bond strength
• 48.5 mL dual-cartridge format ensures consistent resin-to-hardener mix ratio
• Cream color aids visual confirmation of full mixing during dispensing
• DP100 series designation indicates general-purpose structural epoxy formulation
• Cartridge design minimizes mess and waste compared to open-container formats

Compatibility

Designed for use with standard dual-cartridge epoxy dispensing guns compatible with 48.5 mL cartridges. Part of the 3M SCOTCH-WELD DP100 series.

Installation Notes

A licensed or qualified tradesperson should follow all applicable safety data sheet guidance before handling two-part epoxy adhesives, including use of appropriate PPE such as gloves and eye protection. Surfaces should be clean, dry, and free of oil or debris before application to ensure a reliable bond. Dispense and discard the first small amount of mixed adhesive to confirm full mixing before applying to the work surface. Allow the full 24 to 48 hour cure time before subjecting the bonded assembly to load or stress.