3M Scotch-weld 7010410438 Epoxy Adhesive Cartridge 48.5 Ml

Product Description

The 3M SCOTCH-WELD 7010410438 is a two-part epoxy adhesive dispensed from a 48.5 mL cartridge, formulated for structural bonding applications where extended working time is required. Part of the DP190 series, it delivers a working time of 60 to 80 minutes, giving technicians and assemblers adequate time to position and clamp components before cure begins. Full cure is reached at 168 hours. The gray-colored adhesive is well suited for bonding metals, composites, and plastics in industrial maintenance, equipment assembly, and mechanical fabrication environments. Licensed tradespeople and experienced maintenance technicians are the primary installers.

This cartridge adhesive is used in applications requiring strong, load-bearing bonds with a longer open time. It is appropriate for residential and commercial maintenance, industrial assembly, and structural repair work where precise alignment is needed before the adhesive sets. The cartridge format is compatible with standard dual-component dispensing guns, making application controlled and repeatable in field or shop settings.

Key Features

• 60 to 80 minute working time allows component adjustment before cure
• Full cure achieved at 168 hours for maximum bond strength development
• 48.5 mL cartridge format for controlled, mess-free dispensing
• Gray color for visual confirmation of mixed adhesive coverage
• DP190 series two-part epoxy chemistry for structural bonding
• Compatible with standard dual-component cartridge dispensing guns

Compatibility

Designed as an OEM-style two-part epoxy cartridge replacement for use with standard dual-component dispensing equipment accepting 48.5 mL cartridges in the DP190 series format.

Installation Notes

Surface preparation is critical — clean and degrease all bonding surfaces before dispensing. Dispense and discard the first small amount of adhesive from the cartridge to ensure the two components are properly mixed before applying to the work surface. Allow full 168-hour cure before applying load to the bonded assembly. Store cartridge with the mixing nozzle attached between uses to prevent premature cure at the tip.