3M 7100198007 Polyurethane Sealant 600 Ml Gray

Product Description

The 3M 7100198007 is a gray polyurethane sealant packaged in a 600 mL sausage-style container, part of the 3M 540 Series. It is formulated for flexible, durable bonding and sealing in trim and molding attachment applications. The sealant reaches a tack-free state in 60 minutes and achieves full cure in 24 hours, making it suitable for jobs where controlled working time matters. Its polyurethane chemistry delivers elastomeric performance across a wide temperature range, maintaining integrity from -40 degrees F up to 194 degrees F. Licensed contractors and skilled tradespeople working on exterior or interior trim, panel attachments, and similar assemblies are the primary installers.

This sealant is designed for trim and molding attachment applications where a flexible, paintable or permanently gray seal is required. The sausage container format is intended for use with a bulk sausage gun applicator, making it well-suited for production environments or service calls requiring higher volume output than a standard cartridge. It is appropriate for both residential and light commercial projects where polyurethane adhesive sealant performance is specified.

Key Features

• Polyurethane chemistry provides flexible, durable adhesion and sealing
• Tack-free dry time of 60 minutes for faster workflow
• Full cure achieved in 24 hours
• Operating temperature range: -40 degrees F to 194 degrees F
• 600 mL sausage container designed for bulk sausage gun applicators
• Gray color for trim and molding attachment applications

Compatibility

Designed as an OEM-style replacement or direct-use sealant for trim and molding attachment applications requiring polyurethane-based flexible sealant in a 600 mL sausage format.

Installation Notes

This sealant is applied by skilled tradespeople using a compatible bulk sausage gun applicator. Surfaces should be clean, dry, and free of oil, dust, or loose material before application. Allow adequate ventilation during application and curing in enclosed spaces. Do not apply to surfaces outside the stated minimum application temperature of -40 degrees F, and allow full 24-hour cure before exposing the joint to sustained load or moisture immersion.