3M 7100139132 Postforming 94 Ca Spray Adhesive Clear Low Voc

Product Description

The 3M 7100139132 is a high-strength, postformable grade cylinder spray adhesive formulated for professional bonding applications where low VOC compliance is required. It features a unique low-telegraphing pebble spray pattern that minimizes surface distortion on finished materials. The adhesive bonds to a wide range of demanding substrates including decorative laminate, metal, and select rubber materials. Packaged in a pre-pressurized canister, it delivers a maintenance-free, ready-to-use system with no mixing or pump priming required. This product meets SCAQMD Rule 1168 and LEED compliance standards, making it suitable for projects with strict air quality requirements. It is intended for installation by woodworking professionals, fabricators, and specialty vehicle builders.

This adhesive is commonly used in woodworking shops, cabinet fabrication, and specialty vehicle upfitting where decorative laminate must be bonded to substrates with a clean, bubble-free finish. Its postformable grade formulation allows the bonded assembly to be shaped after adhesion, which is critical in countertop edge forming and curved surface applications. It is also well-suited for environments where VOC restrictions are enforced, such as California Air Resources Board regulated facilities and LEED-certified job sites.

Key Features

• Low-telegraphing pebble spray pattern reduces surface distortion on decorative laminate
• Postformable grade allows shaping of bonded assemblies after adhesion cures
• Low VOC formulation meets SCAQMD Rule 1168 and LEED compliance requirements
• Bonds to decorative laminate, metal, and select rubber substrates
• Pre-pressurized canister provides a maintenance-free, ready-to-use delivery system
• Large cylinder format suited for high-volume production environments

Compatibility

Designed for bonding decorative laminate, metal, and select rubber substrates in woodworking and specialty vehicle fabrication applications. Suitable for use in SCAQMD-regulated and LEED-certified project environments.

Installation Notes

Application is typically performed by woodworking fabricators or specialty vehicle upfitters in well-ventilated workspaces. Surfaces should be clean, dry, and free of dust, oil, or loose material before spraying. Follow all applicable safety data sheet guidelines for ventilation and personal protective equipment when using spray adhesives. Do not expose the pressurized canister to heat sources or puncture the container.