3M 7100119217 Cloth Band 747D 1-1/2 in X 1-1/2 in 60 Grit

Product Description

The 3M 7100119217 is a ceramic grain abrasive cloth band designed for demanding grinding and finishing applications. Built on an X-weight cloth backing, this band delivers the durability needed for high-pressure stock removal on metal and similar hard materials. The resin bond system provides heat resistance during aggressive grinding cycles, and a built-in grinding aid helps keep temperatures lower at the contact zone, reducing the risk of workpiece discoloration or heat damage. At 1-1/2 inches wide and 1-1/2 inches in length with a 60-grit cut, it is suited for rapid material removal where surface condition is a secondary priority.

This abrasive band is used in industrial and trade environments wherever small-diameter band grinding is required. Typical applications include weld blending, deburring, and contour grinding on metal fabrication workpieces. The 60-grit X-weight construction makes it appropriate for initial stock removal passes before stepping to finer grits. Metalworking shops, pipefitters, and maintenance technicians commonly use bands of this type on pneumatic or electric file-belt and drum sanders.

Key Features

• Ceramic abrasive grain for aggressive, consistent cut rate
• X-weight cloth backing for high tensile strength and durability under load
• Resin bond construction provides resistance to heat buildup
• Integrated grinding aid promotes cooler grinding and extended band life
• 60-grit designation suited for rapid stock removal and weld blending

Compatibility

Designed as a replacement-style abrasive cloth band for use on power file sanders, drum sanders, and similar small-form grinding tools that accept 1-1/2 inches x 1-1/2 inches bands.

Installation Notes

Installation of abrasive bands should be performed by a qualified operator following the tool manufacturer's band-change procedure. Ensure the tool is fully powered off and disconnected from the air supply or electrical source before changing bands. Inspect the drive drum and backing plate for wear or damage prior to seating a new band. Always wear appropriate PPE including eye protection and gloves when handling abrasive products and operating grinding equipment.

Technical Specifications

• Abrasive Grain: Ceramic
• Backing Type: X-Weight Cloth
• Bond Type: Resin
• Grit: 60
• Width: 1-1/2 inches
• Length: 1-1/2 inches
• Weight: 0.02 pounds
• Unit of Measure: Each
• UPC: 00051141203072

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7100119217