3M 7100069365 DP810NS Low Odor Acrylic Adhesive 200 Ml

Product Description

The 3M 7100069365 is a non-sag, toughened, two-part acrylic adhesive sold under the Scotch-Weld DP810NS designation in a 200 mL cartridge. It features a 1:1 mix ratio, a 10-minute work life, and reaches handling strength in approximately 10 minutes. The formula is designed to produce lower odor compared to standard MMA acrylic adhesives, making it a practical choice for enclosed work areas. It delivers excellent shear and peel strength along with solid impact resistance and durability. Dispensing requires a 3M Scotch-Weld EPX 200 mL applicator gun and compatible mix nozzles, neither of which is included. Installers in industrial, construction, and specialty trade applications use this product for structural bonding of dissimilar substrates.

This adhesive is suited for bonding metals, composites, plastics, and other structural substrates in applications where a fast-setting, high-strength bond is required. Its non-sag formulation allows use on vertical surfaces and overhead joints without slumping before cure. The low-odor characteristic makes it appropriate for use in spaces with limited ventilation where conventional MMA adhesives would present air quality concerns. Typical users include fabricators, industrial maintenance technicians, and trade professionals performing structural or panel bonding work.

Key Features

• Non-sag formulation holds position on vertical and overhead surfaces before cure
• 1:1 mix ratio simplifies metering with a standard EPX applicator
• 10-minute work life and 10-minute handling strength for efficient workflow
• Lower odor than standard MMA acrylic adhesives
• Excellent shear and peel strength with good impact resistance
• Toughened two-part acrylic chemistry for durable structural bonds

Compatibility

Designed for use with the 3M Scotch-Weld EPX 200 mL applicator and compatible 200 mL mix nozzles, sold separately. Suitable for bonding metals, composites, and plastics in structural assembly applications.

Installation Notes

Dispensing requires a 3M Scotch-Weld EPX 200 mL applicator gun and appropriate mix nozzles, which are not included. Surfaces should be clean, dry, and free of oils or contaminants before application. Work in areas with adequate ventilation even with this reduced-odor formula. Allow the adhesive to reach full cure before applying service loads to the bonded assembly.

Technical Specifications

• Mix Ratio: 1:1
• Work Life: 10 minutes
• Handling Time: approximately 10 minutes
• Cartridge Volume: 200 mL
• Color: Tan
• Weight: 0.74 pounds
• Unit of Measure: Each

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7100069365