3M 7100010263 Sanding Disc 3 Inch P1000 Grit Clean Sanding

Product Description

The 3M 7100010263 is a coated abrasive hook-and-loop sanding disc engineered for clean, efficient material removal on painted surfaces, primers, and finish work. Built on a durable, tear-resistant film backing, this 3-inch disc runs at P1000 grit — a fine finishing grit suited for between-coat sanding and final surface preparation. A precise multi-hole pattern drives dust away from the work surface continuously, keeping the cut aggressive and the finish consistent. Aluminum oxide abrasive grains deliver faster cut rates and longer service life compared to conventional garnet abrasives. An open-coat, load-resistant construction resists clogging throughout the disc life.

This disc is intended for use in body shops, finishing operations, and detail sanding applications where dust control and surface quality are priorities. The P1000 grit makes it appropriate for final prep stages before topcoat application or for light scuff sanding between coats. The hook-and-loop attachment system allows fast disc changes without adhesive, and the multi-hole pattern does not need to be aligned to the backing pad holes, reducing changeover time during production or service work.

Key Features

• Precise multi-hole pattern provides continuous dust extraction without requiring hole alignment to the pad
• Open-coat, load-resistant coating resists clogging and extends disc life
• Aluminum oxide abrasive grains cut faster and last longer than garnet alternatives
• Tear-resistant film backing delivers close-tolerance, consistent finish results
• Hook-and-loop attachment allows fast, tool-free disc changes and disc reuse

Compatibility

Designed for use with 3-inch hook-and-loop backing pads on random orbital and orbital sanders used in finishing and surface preparation applications.

Installation Notes

Install by pressing the hook-and-loop face firmly onto a clean, compatible 3-inch backing pad before powering the tool. Inspect the backing pad for worn hooks before each disc change, as a degraded pad reduces disc retention and finish quality. Do not force the disc onto a spinning tool. Replace the disc when cut rate noticeably decreases or when surface finish becomes inconsistent.

Technical Specifications

• Disc Diameter: 3 inches
• Grit: P1000
• Abrasive Type: Aluminum Oxide
• Backing Type: Film
• Attachment Method: Hook and Loop
• Hole Pattern: Multi-Hole
• Weight: 0.01 pounds
• UPC: 00051141208299

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7100010263