3M 7010375741 Loop Thin Fastener Roll White 24in X 200yd

Product Description

The 3M 7010375741 is a thin-profile loop fastener roll designed for light-duty attachment applications where a reduced number of open-and-close cycles is acceptable. The roll measures 24 inches wide by 200 yards long with a finished thickness of 0.04 inches, delivering a profile roughly 75% lower than standard hook and loop fastener systems. The loop face is covered with soft, pliable loops that engage with compatible thin hook material. An acrylic pressure-sensitive adhesive on the backing allows direct application to clean, flat surfaces without mechanical fasteners or additional adhesive. HVAC, electrical, and general trade installers use this product when a low-profile, reusable-but-limited-cycle fastening solution is needed in confined or finished spaces.

This loop fastener roll is suited for applications where the mating hook side fastens directly to fabric, carpet, or loop exhibit surfaces. The low-profile construction makes it appropriate for panel attachment, wire management, display mounting, and similar scenarios where bulk or surface disruption must be minimized. The pressure-sensitive acrylic adhesive backing supports quick application to smooth, dry substrates. It is supplied in a single continuous roll format, allowing the installer to cut sections to the required length in the field. Typical applications span commercial exhibit installation, residential fixture mounting, and light industrial panel retention.

Key Features

• Low-profile loop construction at 0.04 inches thick, approximately 75% thinner than standard hook and loop systems
• Soft, pliable loop face designed for limited open-and-close cycle applications
• Acrylic pressure-sensitive adhesive backing for tool-free surface application
• 24-inch width available in a continuous 200-yard roll for field-cut flexibility
• White color finish suitable for visible or semi-visible installations
• Compatible mating surface includes fabric, carpet, and loop exhibit surfaces

Compatibility

Designed for use with compatible 3M thin hook fastener surfaces; the loop face engages directly with fabric, carpet, and loop exhibit surfaces as stated by the manufacturer. Verify mating hook product compatibility before installation.

Installation Notes

Installation is typically performed by general contractors, HVAC technicians, electricians, or exhibit installers depending on the application. Clean and dry the substrate thoroughly before applying the adhesive-backed loop material to ensure full bond. Cut sections to length using a sharp utility knife or shears rated for adhesive-backed tape products. Limit the number of engagement and disengagement cycles to the rated service life of the loop material to maintain holding strength over time.

Technical Specifications

• Width: 24 inches
• Length: 200 yards
• Thickness: 0.04 inches
• Color: White
• Adhesive Type: Acrylic pressure-sensitive
• Unit of Measure: Roll
• Package Weight: 123 pounds
• Package Length: 64 inches
• Package Width: 34.5 inches
• Package Height: 29 inches
• UPC: 00051111980279

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010375741