3M 7010366871 Scotch-brite Surface Conditioning Belt 148x4 in

Product Description

The 3M 7010366871 is a Scotch-Brite Surface Conditioning Low Stretch Belt designed for industrial surface finishing and conditioning applications. Built on a durable cloth and polyester scrim backing, this non-woven belt measures 148 inches in length and 4 inches in width. The aluminum oxide mineral is bonded with resin and embedded in springy non-woven nylon fibers that conform to part geometry while delivering consistent surface conditioning. The open web construction resists loading, extending abrasive service life across multiple passes. Licensed trades and fabricators use this belt for blending, finishing, and light material removal without marring or distorting the workpiece. Each belt weighs approximately 1.98 pounds.

This belt fits into sequences where moderate cutting action is needed without aggressive stock removal. Its balanced durability and flexibility make it suitable for stainless steel, brass, and a range of other metal substrates. It performs in both single-step and multi-step finishing sequences, fitting belt grinder and wide-belt sander setups that accept a 148-inch by 4-inch belt. Metal fabricators, pipefitters, and industrial maintenance technicians commonly use this product for weld blending, surface prep before coating, and finishing to a consistent scratch pattern.

Key Features

• Durable cloth and polyester scrim backing engineered for low-stretch belt applications
• Springy non-woven nylon fibers condition surfaces while maintaining workpiece geometry
• Open web construction resists loading and prolongs abrasive service life
• Aluminum oxide mineral with resin bond provides consistent, moderate cutting action
• Compatible with stainless steel, brass, and a variety of other metal substrates
• 148 inches long by 4 inches wide for wide-belt and large-format belt grinder use

Compatibility

Designed for use on belt grinders and wide-belt sanders accepting a 148-inch by 4-inch non-woven surface conditioning belt. Suitable for use on stainless steel, brass, and other metal substrates as stated by the manufacturer.

Installation Notes

Installation and belt changes should be performed by qualified personnel following the machine manufacturer's guidelines. Power down and lockout/tagout the belt grinder or sander before mounting or removing the belt. Confirm belt tracking and tension before resuming operation. Inspect the belt for tears or damage prior to each use and replace immediately if the backing or web shows signs of failure.

Technical Specifications

• Belt Length: 148 inches
• Belt Width: 4 inches
• Abrasive Mineral: Aluminum Oxide
• Bond Type: Resin
• Backing Material: Non-Woven Cloth and Polyester Scrim
• Weight: 1.98 pounds
• Unit of Measure: Each
• Minimum Order Quantity: 5
• UPC: 00048011647708

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010366871