3M 7010365312 Scotch-brite Belt 90x4 Inch Non-woven Ao

Product Description

The 3M 7010365312 Scotch-Brite Surface Conditioning Film Backed Belt is a non-woven abrasive belt designed for cleaning, finishing, blending, and deburring on a range of work surfaces. The belt uses a smooth, tough, stretch-resistant nylon film backing that performs well against platens and on stroke sanders where low back-side friction is critical. Aluminum oxide mineral bonded with resin provides consistent cutting action across the belt's 90-inch length and 4-inch width. Licensed tradespeople and industrial finishing technicians in metal fabrication, welding shops, and surface prep environments rely on this belt for repeatable results through an extended service cycle.

This belt is suited for use on stroke sanders and wide belt finishing machines in both light industrial and production environments. Its non-woven construction makes it effective on metal, stainless steel, and other hard substrates where blending weld seams, removing scale, or achieving a consistent surface finish is required. The open fiber matrix reduces debris loading, extending belt life during sustained finishing passes. The 90 x 4 inch format covers a wide footprint, making it practical for flat stock and large panel work.

Key Features

• Non-woven nylon fiber construction allows debris to escape between fibers, reducing loading and extending belt life
• Nylon film backing is stretch-resistant, maintaining close, consistent cutting contact against platens
• Low-friction film back performs well on stroke sanders where reduced back-side friction is needed
• Aluminum oxide mineral with resin bond delivers controlled, repeatable material removal
• Fibers break down gradually to expose fresh mineral, producing consistent cut rates over the belt's service life
• 90 x 4 inch size suits wide belt and stroke sander applications on flat stock and large panels

Compatibility

Designed as a replacement or production-use belt for stroke sanders and wide belt finishing machines that accept a 90 x 4 inch non-woven abrasive belt with a film-backed construction.

Installation Notes

Installation should be performed by a qualified machine operator following the sander manufacturer's belt-tracking and tensioning procedures. Power down and lock out the machine before mounting or removing the belt. Verify belt direction arrow aligns with machine drive direction before starting. Inspect the platen and drive components for wear before fitting a new belt.