3M 7010365019 Abrasive Belt 132x2 Inch Aluminum Oxide

Product Description

The 3M 7010365019 is a Trizact 307EA coated abrasive belt designed for precision intermediate finishing and fine polishing applications. It uses 3M microreplication technology in which micron-graded aluminum oxide particles are formed into uniform pyramidal structures bonded to a flexible rayon cloth backing. As the abrasive pyramids wear during use, fresh mineral is continuously exposed at the cutting face, producing a consistent cut rate and a predictable fine finish. This belt measures 132 inches in length and 2 inches in width and weighs 0.31 pounds. It is suited for use in automated and robotic finishing lines as well as manual grinding operations.

This belt is commonly used in metalworking and fabrication environments for intermediate stock removal, surface conditioning, and fine polishing prior to plating or buffing operations. The flexible rayon cloth backing conforms to contoured and profiled workpiece surfaces, making it effective for both flat and shaped components. It is well-suited for use on stainless steel, carbon steel, aluminum, and similar metals where consistent finish quality across the belt life is required.

Key Features

• Microreplication technology forms aluminum oxide particles into self-sharpening pyramidal structures that continuously expose fresh abrasive mineral as they wear
• Runs cooler than conventional abrasives, reducing heat buildup at the workpiece surface
• Flexible rayon cloth backing conforms to contoured and irregular surfaces for uniform contact
• Three-dimensional abrasive design delivers highly consistent finishes throughout the full belt life, including in robotic and automated applications
• Produces finer surface finishes than conventional electrostatically coated abrasive belts of comparable grit
• Suitable for intermediate finishing and fine polishing stages prior to plating, buffing, or coating

Compatibility

Designed for use on belt finishing and polishing machines that accept a 132-inch by 2-inch abrasive belt. Verify contact wheel hardness, speed range, and platen configuration on the finishing machine before installation to confirm suitability for this belt dimensions and backing type.

Installation Notes

Installation should be performed by qualified metalworking or machine maintenance personnel. Power down and lock out the finishing machine before replacing the belt. Inspect the contact wheel and platen for wear or damage before mounting a new belt. Verify that belt tracking is properly adjusted before resuming operation to prevent edge damage or premature failure.

Technical Specifications

• Belt Length: 132 inches
• Belt Width: 2 inches
• Abrasive Mineral: Aluminum Oxide (Microreplication Technology)
• Backing Material: Rayon Cloth
• Color: Gray
• Weight: 0.31 pounds
• Unit of Measure: Each
• Minimum Order Quantity: 50
• UPC: 00051111690772

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010365019