3M 7010364557 Scotch-brite Unitized Wheel 3 in 1/4 in Arbor

Product Description

The 3M 7010364557 Scotch-Brite Cut and Polish Unitized Wheel is a tightly layered, non-woven abrasive wheel designed for aggressive deburring, blending, and surface finishing on harder metals. Built with a high concentration of aluminum oxide mineral, this wheel cuts fast and delivers a consistent bright finish from first use through the full life of the wheel. At 3 inches in diameter with a 1/4 inch arbor, it fits compact right-angle grinders and die grinders commonly used in fabrication and finishing work. Machinists, fabricators, and metal finishing technicians install this wheel where portability and small tool access are required.

This unitized wheel is suited for work on stainless steel, carbon steel, and high nickel alloys in both shop and field settings. Its small diameter and narrow width make it a practical choice for tight-clearance applications, inside corners, and contoured surfaces where larger wheels cannot reach. It performs well in medium to high-density configurations for controlled material removal without aggressive gouging. The flexible, non-woven construction gives the operator consistent abrasive action across varied surface angles.

Key Features

• High concentration of aluminum oxide abrasive mineral for fast cutting and a consistent bright finish throughout wheel life
• Flexible, non-woven construction provides controlled abrasive action and helps prevent undercutting or gouging
• Tightly layered unitized construction operates in clockwise or counterclockwise rotation
• Resists loading and wears at a uniform rate for continuous cutting action
• 3 inch diameter and 1/4 inch arbor size suited for die grinders and compact right-angle grinders
• Available in medium to hard densities for aggressive deburring and blending on harder metals

Compatibility

Designed for use with die grinders and right-angle grinders accepting a 1/4 inch arbor. Suitable for deburring, blending, and finishing applications on stainless steel, carbon steel, and high nickel alloys.

Installation Notes

Installation of abrasive wheels should be performed by a trained operator following applicable ANSI B11 and OSHA abrasive wheel safety standards. Power down and disconnect the tool from its power source before mounting or changing the wheel. Confirm that the tool RPM rating meets or exceeds the maximum rated speed of the wheel before operation. Inspect the wheel for damage before each use and do not use a wheel that shows cracks, chips, or deformation.

Technical Specifications

• Diameter: 3 inches
• Arbor Size: 1/4 inch
• Abrasive Mineral: Aluminum Oxide (AO)
• Construction: Unitized, non-woven
• Density: Medium to hard
• Weight: 0.2 pounds
• UPC: 00048011156842

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010364557