3M 7010364520 Finishing Flap Brush 6x1x2 in

Product Description

The 3M 7010364520 is a light-duty finishing flap brush designed for cleaning and surface finishing tasks. Individual abrasive sheets are adhered at a 90-degree angle to a central core, producing a soft, conformable action that conforms to irregular or contoured surfaces. The abrasive mineral is talc, rated at a 3T (soft) density. At 0.33 pounds, this brush is suited for applications where gentle material removal and surface preparation are required without aggressive cutting action. It measures 6 inches in length, 1 inch in width, and 2 inches in depth.

This flap brush is intended for light cleaning and finishing operations on metal, wood, composites, or similar workpiece surfaces. Its soft, conformable sheet construction makes it well suited for deburring edges, blending weld marks, and preparing surfaces for coatings or inspection. Tradespeople and fabricators working in HVAC, plumbing, electrical, or general metal fabrication environments will find it practical for finishing tasks that require controlled, gentle abrasion rather than stock removal.

Key Features

• Individual abrasive sheets adhered at 90 degrees to core for consistent flap action
• Talc abrasive mineral provides soft, low-aggression surface finishing
• 3T density rating for soft, conformable contact on irregular surfaces
• Lightweight construction at 0.33 pounds for extended use with reduced fatigue
• Suited for light-duty cleaning, deburring, and pre-coating surface prep

Compatibility

Designed as a light-duty flap brush for use with compatible rotary tool spindles and arbors accepting a 2-inch bore or hub configuration; verify arbor fitment before installation.

Installation Notes

Installation of flap brushes should be performed by a qualified operator following the tool and brush manufacturer's mounting guidelines. Always power down and de-energize the rotary tool before mounting or removing the brush. Confirm that the spindle speed rating of the tool does not exceed the rated RPM for the brush. Wear appropriate eye protection and follow applicable workplace safety standards during operation.

Technical Specifications

• Dimensions: 6 inches x 1 inches x 2 inches
• Weight: 0.33 pounds
• Abrasive Mineral: Talc
• Density: 3T (Soft)
• Sheet Orientation: 90 degrees to core
• Unit of Measure: Each
• Minimum Order Quantity: 3
• UPC: 00048011134321

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010364520