3M 7010363723 Abrasive Belt 24 in X 1/2 in Aluminum Oxide

Product Description

The 3M 7010363723 is a Trizact 237AA coated abrasive belt designed for intermediate finishing and fine polishing applications in metal fabrication and surface preparation. It uses 3M microreplication technology, where micron-graded aluminum oxide mineral is formed into three-dimensional pyramids and bonded to an X-weight cloth backing. As the pyramids wear during use, fresh, sharp mineral is continuously exposed, producing a consistent cut rate and a predictable fine finish throughout the life of the belt. The cloth backing provides flexibility for finishing over contoured surfaces. This belt measures 24 inches in length and 1/2 inch in width.

This belt is suited for intermediate stock removal and fine polishing on metal workpieces prior to plating, buffing, or other surface treatments. The three-dimensional abrasive structure makes it well-suited for automated and robotic grinding and finishing systems where consistent, repeatable surface finishes are required across high part volumes. It is also applicable to manual bench belt grinding operations where finish consistency is a priority.

Key Features

• Microreplication technology forms aluminum oxide into pyramid structures for self-sharpening action
• Fresh mineral is continuously exposed as pyramids wear, maintaining consistent cut throughout belt life
• Runs cooler than conventional abrasives, reducing heat buildup on workpieces
• Flexible X-weight cloth backing conforms to contoured surfaces
• Produces finer finishes than conventional electrostatically coated abrasive belts
• Consistent performance in robotic and automated finishing applications

Compatibility

Designed for use on standard belt grinding and finishing machines that accept 24-inch by 1/2-inch abrasive belts, including both manual and robotic automated systems used in metal fabrication and surface finishing operations.

Installation Notes

Install on a belt grinder or finishing machine with a drive system sized for a 24-inch by 1/2-inch belt. Confirm belt tracking and tension per the machine manufacturer specifications before operation. Inspect the belt for tears or edge damage before mounting. Always power down and de-energize the machine before changing abrasive belts.

Technical Specifications

• Abrasive Mineral: Aluminum Oxide
• Belt Length: 24 inches
• Belt Width: 0.5 inches
• Backing Material: X-Weight Cloth
• Color: Gray
• Weight: 0.04 pounds
• Unit of Measure: Each

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010363723