3M 7010362351 Sanding Sheet 80 Grit 4.5 in X 10 Yd

Product Description

The 3M 7010362351 is an adhesive-back sanding sheet roll constructed with silicon carbide abrasive on an A-weight sandpaper roll backing. Rated at 80 grit, this roll falls in the medium grade range, making it suited for stock removal, surface preparation, and smoothing operations on a variety of substrates. The pressure-sensitive adhesive backing allows the sheet to mount directly to flat or contoured sanding blocks and fixtures without fasteners. The roll format measures 4.5 inches wide and 10 yards long, giving tradespeople and shop technicians a continuous supply that can be cut to any required length on the job.

This sanding sheet roll is commonly used in HVAC fabrication shops, plumbing rough-in work, metalworking, and general trade applications where consistent surface prep is required. The silicon carbide mineral cuts aggressively on metal, plastic, drywall, and composite surfaces. At 80 grit, it removes mill scale, rust, paint, and surface oxidation efficiently before finishing passes. The roll format is practical for bench work, wrap-around sanding, and custom-cut sheet applications where standard pre-cut sheets are not the right fit.

Key Features

• Silicon carbide abrasive mineral for aggressive cutting on hard and non-ferrous surfaces
• 80 grit medium grade suitable for stock removal and surface preparation
• A-weight sandpaper roll backing provides flexibility for contoured and flat sanding applications
• Pressure-sensitive adhesive back mounts without clips or additional fasteners
• Continuous 10-yard roll format allows custom-length cuts to match any job requirement
• 4.5-inch width accommodates standard sanding blocks and fixture platens

Compatibility

Designed for use with standard adhesive-back sanding blocks, fixtures, and flat platens that accept 4.5-inch wide roll stock. Compatible with metal, plastic, composite, and painted surface prep applications requiring an 80-grit medium-grade cut.

Installation Notes

Cut the roll to the required length using a straight edge and utility knife before applying to the sanding block or platen. Ensure the mounting surface is clean and dry before pressing the adhesive side down to achieve full bond contact. Wear appropriate eye protection and a dust mask rated for abrasive dust when sanding metals or composites. Inspect the sheet for loading or wear and replace when cutting performance drops noticeably.