3M 7010362305 Cubitron Ii 982C Fibre Disc 7 in 60 Grit

Product Description

The 3M 7010362305 is the Cubitron II 982C coated abrasive fibre disc, engineered for aggressive grinding on carbon steel and similar ferrous metals. Built on a stiff fibre backing with a heavy-duty resin bond, it uses 3M Precision-Shaped Grain technology to deliver fast, consistent cut rates with reduced operator pressure. At 7 inches in diameter and 60 grit, it is rated to 8,600 RPM and suited for weld grinding, beveling, and stock removal tasks in fabrication and metalworking environments. Licensed tradespeople and fabricators in industrial and manufacturing settings are the primary installers and operators.

This disc is designed for medium to high-pressure grinding applications including weld grinding, beveling, and edge preparation on carbon steel workpieces. It is compatible with standard 7-inch angle grinders in manual, robotic, and pressure-assisted configurations. The 60-grit designation makes it appropriate for aggressive material removal rather than finishing work. Its Precision-Shaped Grain geometry maintains sharp cutting points throughout the disc life, reducing heat buildup and minimizing the frequency of disc changes in high-throughput production environments.

Key Features

• 3M Precision-Shaped Grain maintains sharp triangular cutting points for fast cut rates with less applied pressure
• Ceramic grain construction wears evenly and runs cool, extending disc life compared to conventional ceramic abrasives
• Stiff fibre backing and strong resin bond provide tear resistance under heavyweight grinding loads
• Rated to 8,600 RPM for compatibility with standard 7-inch angle grinders
• Reduced disc changeouts lower downtime in manual, robotic, and pressure-assisted grinding operations
• Lower required pressure reduces operator fatigue during extended grinding sessions

Compatibility

Designed for use with standard 7-inch angle grinders in manual, robotic, and pressure-assisted grinding applications on carbon steel.

Installation Notes

Mounting and disc changes should be performed by qualified personnel following the grinder manufacturer's instructions. Always verify the grinder's rated RPM does not exceed the disc's 8,600 RPM maximum before installation. Inspect the disc for cracks or damage before each use and replace immediately if any defects are found. Use appropriate personal protective equipment including eye and face protection during all grinding operations.

Technical Specifications

• Disc Diameter: 7 inches
• Grit: 60
• Maximum Speed: 8,600 RPM
• Abrasive Type: Precision-Shaped Ceramic Grain
• Backing Type: Coated Fibre
• Weight: 0.12 pounds
• Unit of Measure: Each
• UPC: 00051141277257

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010362305