3M 7010362085 Abrasive Belt 60 Grit 103x50 Inch Ao Cloth

Product Description

The 3M 7010362085 is an open-coat aluminum oxide cloth abrasive belt designed for aggressive stock removal on wood and metal surfaces. Built on a heavyweight cloth backing with a resin bond construction, this belt handles the heat and pressure of high-production wide belt, edge, and portable belt sanding operations. At 103 inches long and 50 inches wide with a 60-grit cut rating, it covers large surface areas efficiently while resisting loading that would otherwise shorten belt life. Fabricators, woodworkers, and metal finishing shops rely on this belt for consistent cut rate across extended production runs.

This belt is suited for wide belt sanding machines, edge sanders, and portable belt sanding equipment used in production woodworking, millwork, metal fabrication, and general surface preparation. The open-coat construction is especially effective on resinous or sticky substrates such as pine, where conventional belts load quickly and lose cut performance. The washable backing extends service life on high-loading materials by allowing residue to be cleared between uses.

Key Features

• Premium aluminum oxide abrasive grain delivers increased cut rate and extended abrasive life
• Open-coat construction resists loading on wood, including resinous species such as pine
• Heavyweight cloth backing supports high-production sanding environments with consistent dimensional stability
• Washable backing allows repeated use and residue removal on high-loading substrates
• Resin bond construction withstands high heat and pressure for longer service life
• Sized at 103 inches long by 50 inches wide for wide belt sanding applications

Compatibility

Designed for use on wide belt sanders, edge sanders, and portable belt sanding equipment configured for 103-inch by 50-inch belts. Suitable for wood and metal surface preparation applications.

Installation Notes

Install and tension the belt according to the sanding machine manufacturer's specifications before operation. Confirm belt tracking is aligned before starting the machine under load. Power down and lock out the machine before changing belts. Inspect the belt for tears or edge damage prior to each use and replace immediately if defects are found.

Technical Specifications

• Belt Length: 103 inches
• Belt Width: 50 inches
• Grit: 60
• Abrasive Material: Aluminum Oxide
• Backing Material: Cloth
• Coat Type: Open Coat
• Bond Type: Resin
• Weight: 8.87 pounds
• Unit of Measure: Each
• Minimum Order Quantity: 3

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010362085