3M 7010361906 Abrasive Belt P150 Grit 60x37 Inch Ao Cloth

Product Description

The 3M 7010361906 is an open-coat aluminum oxide abrasive belt designed for wide belt and edge sanding applications in professional woodworking environments. The 370DZ series uses a premium-grade aluminum oxide mineral bonded with a resin system rated for high heat and pressure. The heavyweight cloth backing supports both rough stock removal and final finishing passes. At P150 grit, this belt targets intermediate to finish-stage sanding where surface quality and consistent cut rate matter. Licensed woodworking shops, millwork facilities, and cabinet manufacturers are the primary users of this belt format.

This belt measures 60 inches in length and 37 inches in width, sized for wide belt sanders commonly found in production woodworking and millwork operations. The open-coat construction and anti-static treatment help keep the abrasive surface clear of sawdust and resin buildup during continuous runs. The washable backing makes it especially practical when sanding resinous species such as pine, where loading would otherwise shorten belt life significantly. It is sold in a minimum quantity of 5 belts per order.

Key Features

• Premium aluminum oxide mineral delivers improved cut rate and extended abrasive life compared to standard-grade minerals
• Open-coat construction reduces loading in high-dust woodworking environments
• Anti-static treatment further limits dust accumulation for sustained cut performance
• Heavyweight cloth backing handles the mechanical stress of wide belt and edge sanding at coarser grits
• Washable backing resists pitch and resin buildup when sanding high-resin species
• Resin bond rated for high heat and pressure, supporting longer service life in production settings

Compatibility

Designed for use on wide belt sanders and edge sanders that accept a 60-inch by 37-inch abrasive belt in woodworking and millwork applications.

Installation Notes

Belt installation should be performed by qualified shop personnel with the sander powered off and locked out per applicable lockout/tagout procedures. Verify belt tracking and tension according to the machine manufacturer specifications before resuming operation. Inspect the belt for tears or splice separation before each use. Do not run a damaged or misaligned belt.

Technical Specifications

• Belt Length: 60 inches
• Belt Width: 37 inches
• Grit: P150
• Abrasive Mineral: Aluminum Oxide
• Coat Type: Open Coat
• Backing Material: Heavyweight Cloth
• Bond Type: Resin
• Anti-Static Treatment: Yes
• Washable Backing: Yes
• Weight: 3.45 pounds
• Unit of Measure: Each
• Minimum Order Quantity: 5
• UPC: 00051144769285

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010361906