3M 7010361584 Abrasive Belt 577F 60 Grit 15.5x2.75 Inch

Product Description

The 3M 7010361584 is the 577F alumina zirconia coated abrasive belt designed for aggressive stock removal on metals and other demanding substrates. Unlike standard aluminum oxide belts, this belt uses an alumina zirconia mineral with a built-in grinding aid that delivers higher cutting efficiency and longer belt life under sustained load. The heavyweight, water-resistant polyester cloth backing handles high-pressure grinding, edge work, and high-production operations without breaking down. At 60 grit, it removes material quickly and runs cool enough for use on heat-sensitive metals. Licensed HVAC, fabrication, and metalworking professionals reach for this belt when throughput and surface quality both matter.

This belt measures 15.5 inches in length and 2.75 inches in width, fitting standard belt grinders and file sanders that accept this size. The 60-grit designation makes it a strong choice for weld blending, deburring, and rough shaping on aluminum, stainless steel, carbon steel, and similar metals. The cool-running characteristic of the alumina zirconia grain reduces heat buildup on the workpiece, helping maintain dimensional tolerances on thin stock or heat-sensitive alloys. Sold individually, it suits both shop and field use.

Key Features

• Alumina zirconia grain with grinding aid cuts faster and lasts longer than aluminum oxide on metal substrates
• 60-grit abrasive provides aggressive stock removal for weld blending, deburring, and rough shaping
• Heavy polyester cloth backing resists tearing under high contact pressure and edge grinding
• Water-resistant construction stands up to wet grinding and coolant use
• Cool-running grain minimizes heat buildup on aluminum, stainless steel, and other heat-sensitive metals
• Consistent mineral orientation delivers uniform scratch patterns and repeatable results

Compatibility

Designed as a direct-fit replacement belt for belt grinders and file sanders that accept a 15.5-inch by 2.75-inch abrasive belt.

Installation Notes

Installation is performed by metalworkers, fabricators, and maintenance technicians familiar with belt grinder operation. Before mounting, confirm the machine is powered off and the drive belt is fully stopped. Track the belt on the platen before applying full pressure to ensure proper alignment and reduce edge wear. Inspect the belt for tears or delamination before each use and replace immediately if damage is found.

Technical Specifications

• Abrasive Mineral: Alumina Zirconia
• Grit: 60
• Belt Length: 15.5 inches
• Belt Width: 2.75 inches
• Backing Material: Heavyweight Water-Resistant Polyester Cloth
• Color: Green
• Weight: 0.1 pounds
• Unit of Measure: Each

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010361584