3M 7010361419 Abrasive Belt P100 Grit 15.5x3.5 Inch Cloth

Product Description

The 3M 7010361419 is a coated abrasive belt designed for stroke sanding and metal finishing applications. It combines aluminum oxide and ceramic grain on an X-weight cotton cloth backing, producing consistent cut rates and long belt life on ferrous and non-ferrous metals. The anti-friction backing reduces drag so the belt runs smoothly at operating speeds. A built-in grinding aid helps dissipate heat during aggressive stock removal, protecting both the workpiece surface and the belt. This belt is sized at 15.5 inches long by 3.5 inches wide and carries a P100 grit rating, making it suitable for intermediate finishing passes.

This belt is intended for use on metal substrates including stainless steel, nickel alloys, and other hard metals where controlled surface finish is required. Typical applications include weld blending, surface conditioning, and intermediate finishing on fabricated metal components. The ceramic and aluminum oxide grain blend supports sustained cut performance across multiple passes, reducing the frequency of belt changes in production or field service settings. It is used by metal fabricators, pipefitters, and maintenance technicians working on structural and process equipment.

Key Features

• Ceramic aluminum oxide grain blend delivers high cut rate and extended belt life
• X-weight cotton backing withstands aggressive sanding and grinding pressure
• Anti-friction backing promotes smooth belt travel and reduced heat buildup
• Grinding aid helps lower surface temperatures during metal removal
• P100 grit rating suited for intermediate finishing passes on metal
• Effective on stainless steel, nickel alloys, and other hard metal substrates

Compatibility

Designed as an OEM-style replacement belt for belt sanders and stroke sanders accepting a 15.5-inch by 3.5-inch abrasive belt in metal finishing and fabrication applications.

Installation Notes

Installation should be performed by a qualified operator familiar with abrasive belt equipment. Before mounting the belt, power down and lockout the sander per OSHA lockout/tagout procedures. Verify belt tracking and tension according to the machine manufacturer guidelines before resuming operation. Inspect the belt for tears or edge damage before each use and replace immediately if damage is found.

Technical Specifications

• Belt Length: 15.5 inches
• Belt Width: 3.5 inches
• Grit: P100
• Backing Material: X-weight cotton cloth
• Abrasive Grain: Ceramic aluminum oxide blend
• Unit of Measure: Each
• Weight: 0.1 pounds

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010361419