3M 7010361410 Abrasive Belt 72x2 Inch Aluminum Oxide

Product Description

The 3M 7010361410 is a Trizact 307EA coated abrasive belt designed for intermediate finishing and fine polishing on metal surfaces. It uses microreplication technology in which micron-graded aluminum oxide particles are formed into three-dimensional pyramids and bonded onto a flexible rayon cloth backing. As the pyramids wear during use, fresh, sharp mineral is continuously exposed, delivering a consistent cut rate and a predictable fine finish from start to finish. The belt measures 72 inches in length and 2 inches in width, and weighs approximately 0.37 pounds. It is suited for use in both robotic finishing lines and manual grinding applications.

This belt is intended for metal fabrication and surface finishing operations where intermediate stock removal and pre-plate or pre-buff surface preparation are required. The flexible rayon backing conforms to contoured workpiece surfaces, making it effective on curved or irregular geometries. It is commonly used in industrial and manufacturing environments by metalworking tradespeople and fabricators working on ferrous and non-ferrous substrates prior to plating, buffing, or final coating operations.

Key Features

• Microreplication technology forms aluminum oxide into self-sharpening pyramidal structures for consistent cut throughout belt life
• Flexible rayon cloth backing conforms to contoured and irregular surfaces
• Runs cooler than conventional abrasives, reducing heat buildup at the workpiece
• Three-dimensional abrasive design produces repeatable finishes in robotic and automated applications
• Produces finer surface finishes than conventional electrostatically coated abrasive belts
• Suited for intermediate finishing and fine polishing prior to plating or buffing

Compatibility

Designed for use on belt grinders and finishing machines that accept 72-inch by 2-inch abrasive belts. Suitable for use on ferrous and non-ferrous metal substrates in industrial surface finishing applications.

Installation Notes

Installation should be performed by a qualified operator following the machine manufacturer's belt-changing procedures. Power down and lock out the belt grinder before removing or installing the abrasive belt. Verify belt tracking and tension according to the equipment manufacturer's specifications before resuming operation. Inspect the belt for tears or edge damage before each use.

Technical Specifications

• Belt Length: 72 inches
• Belt Width: 2 inches
• Abrasive Mineral: Aluminum Oxide (microreplication)
• Backing Material: Rayon Cloth
• Color: Gray
• Weight: 0.37 pounds
• Unit of Measure: Each
• Minimum Order Quantity: 50
• UPC: 00051125110242

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010361410