3M 7010360355 747D Abrasive Belt 80 Grit 6.28x1 Inch

Product Description

The 3M 7010360355 is a coated abrasive belt in the 747D series, engineered for stroke sanding and metal finishing applications. It uses a blend of ceramic and aluminum oxide grain on an X-weight cotton backing, delivering a fast cut rate and extended belt life compared to conventional abrasive belts. At 6.28 inches long and 1 inch wide with an 80 grit rating, this belt is sized for precision sanding on ferrous and non-ferrous metals. A built-in grinding aid reduces heat buildup during aggressive stock removal, and an anti-friction backing treatment keeps the belt running smoothly under load. HVAC fabricators, metalworkers, and maintenance technicians working with stainless steel and nickel alloys will find consistent, repeatable finishes with this belt.

This belt is well suited for stroke sanding operations on metal substrates including stainless steel, nickel alloys, and carbon steel. The 80 grit classification makes it effective for intermediate finishing and light stock removal where surface quality matters. It is commonly used in fabrication shops, HVAC duct work finishing, and industrial maintenance settings where tight tolerances and clean surface finishes are required. The X-weight cotton backing holds up under sustained pressure and high-cycle use without delaminating or stretching.

Key Features

• Ceramic and aluminum oxide grain blend for improved cut rate and belt longevity
• 80 grit rating suited for intermediate metal finishing and light stock removal
• X-weight cotton backing resists tearing and deformation under aggressive sanding pressure
• Anti-friction backing treatment promotes smooth belt tracking and reduces drag
• Grinding aid integrated into the bond reduces heat generation at the contact point
• Consistent surface finish output on stainless steel, nickel alloys, and similar metals

Compatibility

Designed for use on stroke sanders and similar belt sanding equipment accepting a 6.28-inch by 1-inch abrasive belt. Suitable for finishing stainless steel, nickel, and other metal substrates as stated by the manufacturer.

Installation Notes

Install on compatible belt sanding equipment with the machine powered down and unplugged before changing belts. Verify belt tracking alignment before resuming operation to prevent edge wear or belt drift. Always use appropriate eye protection and respiratory protection when grinding or sanding metal. Follow the equipment manufacturer's guidelines for belt tension and speed ratings.

Technical Specifications

• Series: 747D
• Grit: 80
• Abrasive Type: Ceramic Aluminum Oxide Blend
• Backing Material: X-Weight Cotton Cloth
• Belt Length: 6.28 inches
• Belt Width: 1 inch
• Weight: 0.01 pounds
• Unit of Measure: Each
• UPC: 00051125563697

Standard Information

• Brand: 3M
• Manufacturer Part Number: 7010360355